How to Calibrate Monitor Brightness
Calibrate monitor brightness in the light you work in, using the monitor's own controls in order: picture mode first, then brightness, then contrast, then color. Judge each step with a black-to-white gradient image and plain black and white screens, so dark detail stays visible and white detail does not wash out. Change one setting at a time and recheck the gradient after each change.
Set the room light first
Set up the room the way you use it for work, with the same lamps and window light you sit in each day. Keep direct light off the screen surface, since glare hides dark detail while you judge brightness. Leave the monitor on while you work through the steps below, and sit in your normal viewing position for every check. If the room light changes later, the same settings will look different, so finish the whole sequence in one sitting under one lighting setup.
Reset the picture mode
Open the monitor menu with its buttons or joystick and choose a standard or sRGB picture mode as your starting point. Turn off dynamic contrast, auto brightness and eco settings if your menu offers them, since settings that change on their own undo your calibration while you work. Set sharpness and color sliders back to their middle or default positions before you begin. Your monitor manual shows where each control sits in the menu, so keep it open beside you during this step.
Adjust brightness with a gray ramp
Display a black-to-white gradient image that fills the screen, plus a plain black screen and a plain white screen. Lower the brightness control until the darkest steps of the gradient merge into black, then raise it slowly until those steps separate again while plain black still looks black. Stop at the point where dark detail is just visible without the black screen turning gray. Recheck the plain black screen after you stop, since brightness set too high lifts black first.
Set contrast after brightness
With brightness set, move to the contrast control and view the white end of the gradient. Raise contrast until the brightest steps start to merge into plain white, then lower it until white detail separates again. Keep the plain white screen white without losing detail in the white end of the gradient. Go back to the brightness control once more and confirm the dark steps still separate, since contrast changes can shift how the dark end looks.
Finish with color and sharpness
Choose a color temperature preset that looks neutral on the plain white screen, and pick a gamma preset that keeps mid-gray steps evenly spaced on the gradient. Touch the red, green and blue sliders only if white still carries a color cast after the preset choice, moving one slider at a time and rechecking white after each move. Set sharpness so text edges look clean without bright outlines around letters. Write down every setting you chose, so you can return to the same setup after a reset.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch FHD IPS monitor at 144Hz with two HDMI inputs and tilt adjustment for setting screen position before calibration.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch FHD IPS monitor at 240Hz with 99% sRGB color coverage, plus HDMI and DisplayPort inputs for calibration work.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch FHD IPS monitor at 120Hz with 250 nits brightness and 99% sRGB, plus HDMI and VGA inputs.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch FHD monitor at 100Hz with 100% sRGB color gamut, DisplayPort and two HDMI inputs, plus built-in speakers.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Should I use monitor controls or operating system settings?
Start with the monitor controls for picture mode, brightness, contrast and color, since those settings stay with the screen itself. Use operating system or graphics settings afterward only for small corrections, and avoid raising brightness in both places at once.
Why does my screen look washed out after calibration?
Brightness or contrast set too high lifts black toward gray and merges the gradient steps into white. Return to the gradient image, lower brightness until plain black looks black again, then lower contrast until white detail separates.
How often should I recalibrate monitor brightness?
Recheck when signs appear: room lighting changes, a new monitor joins the desk, settings reset after a power loss, or dark and white detail stops separating on the gradient. Run the same steps in the same order each time.



