Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Build a PC Without a Case

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

You can build a PC without a case by mounting the motherboard on a non-conductive surface and connecting the parts as you would inside a case. The board, CPU, cooler, memory, storage, graphics card, and power supply all work the same outside a case, and you start the PC with the power button header or a power switch. Keep the parts clear of metal and loose screws while it runs.

  1. Pick a flat, non-conductive surface

    Set the motherboard on its own box, a wooden desk, or an open frame. Cardboard and wood do not conduct power, so they make a plain base for the board. Keep the surface clear of screws, tools, and metal parts that could touch the board. Do not set the board on a metal tray or on anti-static bags with a conductive outer layer, since those can short the board. Leave space around the board for the cooler, graphics card, and cables.

  2. Install the parts on the board

    Fit the CPU, cooler, and memory into the motherboard first, then add the storage drive and graphics card. Follow the motherboard manual for the memory slots and the cooler mount, since each board places them in its own spots. Connect the main power cable and the CPU power cable from the power supply, then plug in the front-panel power button header or a power switch. Check each cable twice before you switch the power supply on.

  3. Power it on and check the screen

    Switch the power supply on, then press the power switch connected to the power button header. Watch for the fans to spin and the display to show the BIOS screen on the connected monitor. If the screen stays blank, switch the power supply off, unplug it, and reseat the memory and graphics card. Check that the monitor cable goes to the graphics card when one is installed, or to the motherboard video output when it is not.

  4. Keep it clear while it runs

    Without a case, dust reaches the board and no fans are mounted, so keep it away from pets, drinks, and loose objects. Do not rest tools or metal on the board while it runs, and keep cables clear of the fans. Switch the power supply off and unplug it before you move the board or swap a part. When the build works, move it into a case or onto an open frame for longer use.

What you need

ASUS ROG Strix B550-F Gaming

ASUS ROG Strix B550-F Gaming

An ATX board with an AM4 socket, DDR4 memory, WiFi 6E, PCIe 4.0, dual M.2 slots, and BIOS Flashback for a caseless build.

View on Amazon
GIGABYTE B850 AORUS Elite WIFI7

GIGABYTE B850 AORUS Elite WIFI7

An ATX board with an AM5 socket, DDR5 memory, PCIe 5.0, three M.2 slots, WiFi 7, and EZ-Latch for a caseless build.

View on Amazon
GIGABYTE B550M K

GIGABYTE B550M K

A Micro-ATX board with an AM4 socket, DDR4 memory, PCIe 4.0, two M.2 slots, and Q-Flash for a smaller caseless build.

View on Amazon
MSI PRO B760-P

MSI PRO B760-P

An ATX board with an LGA 1700 socket, DDR4 memory, PCIe 4.0, Wi-Fi 6E, Bluetooth 5.3, and M.2 for a caseless build.

View on Amazon

These come from our ranked list Best Motherboard, which compares them spec by spec.

FAQ

Do I need a case to start a new PC?

No. A motherboard runs on a flat, non-conductive surface with the parts fitted and the power supply connected. A case adds dust protection, fan mounts, and a power button, but the board works the same without one.

How do I start a PC without a case button?

Use a power switch connected to the power button header on the motherboard, or a standalone power switch. The motherboard manual shows which two pins on the front-panel header start the board.

Can I leave a PC running without a case?

You can run it briefly, but a board left out gathers dust and sits exposed to spills or knocks. Move the build into a case or onto an open frame once it works.

Ranked motherboards guides