Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Build a Gaming PC from Scratch

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Building a gaming PC from scratch means picking parts that fit each other, then putting them together in a case. Start with the motherboard: its socket sets the CPU, its memory generation sets the RAM, and its form factor sets the case size. The four boards here cover AM4, AM5 and LGA 1700 sockets, with DDR4 and DDR5 memory and PCIe 4.0 and 5.0 slots.

  1. Pick parts that fit the motherboard

    Choose the CPU to match the board's socket, and the memory to match its generation. An AM4 board takes DDR4 memory, while an AM5 board takes DDR5, and an LGA 1700 board takes an Intel CPU from the generations it lists. Check the case size against the board's form factor: ATX boards need a case that takes ATX, while a Micro-ATX board also fits smaller cases. Before you buy, check the requirements published for the games and software you plan to run.

  2. Fit the CPU, memory and storage first

    Set the board on its box or a flat bench and fit the CPU into the socket, following the maker's manual for the latch and the arrow marks. Press the memory into its slots until the clips close, and fit the M.2 drive into its slot with the screw or latch the board provides. Doing this outside the case leaves room for your hands and lets you see the clips and slots clearly.

  3. Mount the board in the case

    Shut the machine down and unplug it before you open it, and follow the maker's manual. Line the board up with the case standoffs and the rear panel cutout, then fasten it with the screws from the case. Do not force the board into place: if a standoff does not line up, move it to the hole that matches the board's form factor.

  4. Connect power, drives and fans

    Plug the power supply cables into the board's power connectors, following the board manual for which cable goes where. Connect the storage drives and the case fans to the headers the board marks for them, and route the cables so they stay clear of the fans. A tidy run of cables also leaves air room to move through the case.

  5. Connect the screen and switch on

    Connect the monitor to the graphics card, or to the board's HDMI or DisplayPort output, and plug in the keyboard and mouse. Switch the machine on and watch for the BIOS screen, then check that the board sees the memory and drives you fitted. If nothing shows, switch it off, unplug it and check each cable and part against the maker's manual.

What you need

ASUS ROG Strix B550-F Gaming

ASUS ROG Strix B550-F Gaming

An AM4 ATX board with DDR4 memory, PCIe 4.0, dual M.2 slots, WiFi 6E and a 2.5Gb LAN port.

View on Amazon
GIGABYTE B850 AORUS Elite WIFI7

GIGABYTE B850 AORUS Elite WIFI7

An AM5 ATX board with DDR5 memory, PCIe 5.0, three M.2 slots, WiFi 7 and a 2.5GbE LAN port.

View on Amazon
GIGABYTE B550M K

GIGABYTE B550M K

A Micro-ATX AM4 board with DDR4 memory, PCIe 4.0 and two M.2 slots for a smaller case build.

View on Amazon
MSI PRO B760-P

MSI PRO B760-P

An LGA 1700 ATX board with DDR4 memory, PCIe 4.0, WiFi 6E and a 2.5Gbps LAN port for Intel builds.

View on Amazon

These come from our ranked list Best Motherboard, which compares them spec by spec.

FAQ

Do the CPU and motherboard have to match?

Yes. The CPU must fit the board's socket, and the memory must match the board's generation. The boards here use AM4, AM5 or LGA 1700 sockets, with DDR4 or DDR5 memory.

What is the difference between DDR4 and DDR5 memory?

They are different memory generations, and a board takes one or the other. The AM4 and LGA 1700 boards here take DDR4, while the AM5 board takes DDR5, so match the memory to the board.

Can I build a gaming PC in a small case?

Yes, if the parts fit the case. A Micro-ATX board like the GIGABYTE B550M K fits smaller cases than an ATX board, so check the case size against the board's form factor first.

Ranked motherboards guides