How to Attach Wires to a Motherboard
To attach wires to a motherboard, match each cable plug to the header or socket named for it in the board manual, then push the plug on until it sits flat. Power cables, front panel leads, fan cables and storage cables each have their own connector, so work through them in groups.
Shut down and unplug the PC
Shut the PC down, switch the power supply off if it has a switch, and unplug the power cable from the wall. Follow the maker's manual for your motherboard and case before you open the side panel. Keep the screws together and work on a clear surface so you can see each header and cable end before you start.
Sort the wires by connector type
Group the cables by the job each one does: main power from the power supply, CPU power, front panel leads for the power button and lights, fan cables, and storage data cables. Open the motherboard manual to the board diagram and find where each group connects. Matching the plug shape to the diagram first stops you forcing a plug onto the wrong header.
Connect the power cables
Line up the main power plug from the power supply with the main power socket on the board and push it on until the latch clicks. Then connect the CPU power plug to the CPU power socket near the processor socket. Push each plug straight on, check the latch holds, and give the cable a light pull to confirm it stays seated.
Connect front panel and fan wires
Fit the small front panel leads onto the front panel header pins in the order the manual diagram shows, since each lead has its own pins. Then push each fan cable onto a fan header near that fan. Route the cables along the case edge and tie back loose length so nothing touches fan blades or gets in the way of airflow through the case.
Connect storage and check your work
Push each storage data cable onto a storage port on the board and onto the drive, until each end sits flat. Refit the side panel, plug the power cable back in, and switch the PC on. Watch the fans start and check that the drives appear, then shut down and recheck any plug that sits loose or at an angle.
What you need

ASUS ROG Strix B550-F Gaming
An ATX AM4 board with DDR4, PCIe 4.0, WiFi 6E and HDMI 2.1, so check its manual diagram for each header before you attach wires.
View on Amazon
GIGABYTE B850 AORUS Elite WIFI7
An ATX AM5 board with DDR5, PCIe 5.0 and USB-C, so match each power and front panel plug to the sockets in its manual.
View on Amazon
GIGABYTE B550M K
A Micro-ATX AM4 board with DDR4, PCIe 4.0 and USB 3.2 Gen 1 ports, so plan cable reach in a smaller case before you connect wires.
View on Amazon
MSI PRO B760-P
An ATX LGA 1700 board with DDR4, PCIe 4.0, Wi-Fi 6E and 8-pin plus 4-pin CPU power connectors to seat near the processor socket.
View on AmazonThese come from our ranked list Best Motherboard, which compares them spec by spec.
FAQ
What if a plug will not fit a header?
Stop and check the manual diagram again instead of forcing it. Each plug is shaped for one socket or header, so a plug that resists is on the wrong header or turned the wrong way. Line it up again and push it straight on.
Which wires must connect for the PC to start?
The main power cable, the CPU power cable and the front panel power button lead must all connect before the PC can start. Fan and storage cables can follow, but the board needs both power cables seated to switch on.
Can I attach wires with the PC switched on?
No. Shut the PC down and unplug it before you attach or remove any wire inside the case. Follow the maker's manual for your board, and only switch the PC on after every plug sits flat and the side panel is back on.



