How to Attach a Monitor to a Monitor Arm
To attach a monitor to a monitor arm, remove the stand, fit the VESA plate to the back of the monitor with the screws from the arm, then hang the monitor on the arm and secure it. Check the mount pattern and the weight limit in the manuals first, since they differ between monitors and arms. Then connect the video and power cables and adjust the height and tilt.
Check the mount pattern and weight
Start by checking the monitor manual for the VESA mount pattern on the back of the monitor, and the arm manual for the patterns the arm takes. Check the weight limit in the arm manual against the weight of the monitor. Unplug the monitor and its cables before you start, and lay the screen face down on a soft cloth on a desk.
Remove the monitor stand
Follow the monitor manual to take the stand off the back of the monitor. Some stands slide off a bracket, while others come off with screws, so follow the steps for your model. Put the stand and its screws aside in case you want to use the monitor on a desk again. Leave the back of the monitor clear for the VESA plate.
Fit the VESA plate to the monitor
Line up the plate from the arm with the holes on the back of the monitor and fit the screws that came with the arm. Tighten the screws until the plate sits flat and does not move, but do not force them past that point. Check that the plate is centered and that no cable or port on the back is covered by the plate.
Hang the monitor on the arm
Lift the monitor by its sides and lower it onto the arm until the plate catches on the arm mount. Secure the plate with the latch or screw the arm manual shows, then let go slowly and check that the monitor stays in place. If the monitor sags or tilts on its own, take it off and check the fit and the weight limit again.
Connect cables and adjust the position
Plug the video cable into the monitor and the computer, using HDMI or DisplayPort, then plug in the power cable. Turn on the monitor and check that a picture shows. Move the monitor to the height and tilt you want, following the arm manual for the adjustment knobs, and check that the cables have slack to move with the arm.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch IPS monitor with 1920x1080 resolution, a 144 Hz refresh rate, two HDMI ports, and tilt adjustment.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch IPS monitor with 1920x1080 resolution, a 240 Hz refresh rate, HDMI and DisplayPort, and tilt adjustment.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch IPS monitor with 1920x1080 resolution, a 120 Hz refresh rate, HDMI and VGA, and a VESA mount.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch monitor with 1920x1080 resolution, a 100 Hz refresh rate, DisplayPort and two HDMI ports, built-in speakers, and a VESA wall mount pattern.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Do all monitors fit a monitor arm?
No. Check the monitor manual for the VESA mount pattern and the arm manual for the patterns it takes, and check the weight limit against the weight of the monitor.
Do I need to remove the monitor stand first?
Yes. Remove the stand following the monitor manual, then fit the VESA plate to the back of the monitor. Keep the stand and its screws in case you use the monitor on a desk again.
What cables do I connect after mounting?
Connect the video cable, such as HDMI or DisplayPort, and the power cable. Check that the computer port and the monitor port match, and that the cable sits firmly in place.
What if the monitor tilts forward after mounting?
Tighten the tilt adjustment on the arm following the arm manual, and check that the monitor sits level. If it still moves, check the weight limit in the arm manual.



