Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Adjust a Monitor Stand

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To adjust a monitor stand, hold the screen with both hands and move it in the direction the stand allows: tilt it forward or back, raise or lower the height, or swivel the base. Set the height so the top of the screen sits at eye level. If the screen will not move, check the manual for a lock or a tension screw before forcing it.

  1. Find what your stand adjusts

    Start by checking the monitor manual for the stand controls. Check which movements your stand allows: tilt forward and back, height, swivel, or rotation. Look for a knob, a lever, or a lock on the stand arm or base before you push on the screen. If the stand has a tension screw, note where it sits so you can tighten it after you adjust the screen.

  2. Adjust the tilt

    Hold the screen with both hands, one on each side, and tilt it slowly forward or back until the picture looks straight from where you sit. Move in small steps and let go gently to see if the screen stays where you put it. If it drifts back or sinks, tighten the tension screw a little and try again. Never pull on one corner, since that twists the stand and the screen.

  3. Set the height and distance

    Raise or lower the stand until the top of the screen sits at eye level when you sit in your normal chair. Keep the screen about an arm's length away so you can read text without leaning in. If your stand only tilts, raise the whole monitor with a stable riser or move your chair until the top of the screen meets your eyes. Check the height again after you tilt the screen, since tilting changes where the top edge sits.

  4. Swivel, rotate, and lock it in place

    Turn the base to swivel the screen toward you, and rotate the screen to portrait only if your stand supports it. Make each change while holding the screen on both sides, then let go and check that the screen holds its place. Tighten any knob or tension screw until the screen stops drifting, but stop as soon as it holds. If a control feels stuck, check the manual instead of forcing it.

  5. Move to a VESA mount when the stand falls short

    If the included stand only tilts and you need height or swivel control, a VESA arm or mount gives you those movements. The Acer 23.8-inch monitor and the Sceptre 24-inch monitor are both VESA mountable, so either one can move to an arm that adjusts height, tilt, and swivel. Check the mount pattern and the monitor weight against the arm you buy, and follow the arm manual to attach the monitor.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch 1920x1080 IPS monitor whose stand tilts, with a 144Hz refresh rate and two HDMI ports.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch 1920x1080 IPS monitor whose stand tilts, with a 240Hz refresh rate, two HDMI ports, and DisplayPort 1.4.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch 1920x1080 IPS monitor with a 120Hz refresh rate, HDMI and VGA ports, and a VESA mount.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch 1920x1080 monitor with a 100Hz refresh rate, DisplayPort and two HDMI ports, built-in speakers, and a VESA wall mount.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

Why won't my monitor stand move?

Check for a lock or a tightened tension screw on the stand arm or base, and check the manual for a release. Do not force the screen, since forcing it can damage the stand or the panel.

Can I adjust the stand while the monitor is on?

Yes. You can tilt, raise, lower, or swivel the screen while it shows a picture, which helps you see the change as you make it. Hold the screen with both hands and move it slowly.

What if my stand only tilts?

Use the tilt to set the angle, then set the height another way: raise the monitor on a stable riser or adjust your chair. If you need height and swivel control from the stand itself, move the monitor to a VESA arm.

Ranked monitors guides