Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Adjust Monitor Stand Height

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To adjust monitor stand height, find whether your stand slides on a column or only tilts, then hold the base steady and slide the screen up or down until the top of the screen sits level with your eyes.

  1. Check what your stand can adjust

    Look at the stand and the manual to see whether it slides up and down, tilts or swivels. Some stands only tilt, so the height stays fixed even when the screen angles. If the stand has a sliding column, it moves; if it has a fixed post, it does not. Knowing this first saves you from forcing a stand that was never made to move.

  2. Move the stand in small steps

    Hold the base steady with one hand and grip the sides of the screen with the other. Slide the screen up or down in small steps, and let go gently to see whether it stays where you put it. If it slips back down, push it up again and check whether the stand has a lock or a screw to hold the height. Never force a stand that will not move.

  3. Set the screen at eye level

    Sit in your chair the way you sit to work, then look straight ahead. The top of the screen should sit level with your eyes, so you look slightly down at the middle of the screen. If the stand cannot reach that height, raise the monitor on a stable riser, or swap the stand for a monitor arm if your monitor has a VESA mount pattern. Check the height again after you change chairs or desks.

  4. Tilt the screen after setting the height

    Once the height is right, tilt the screen so it faces you straight on. Hold the sides of the screen and tip the top edge back or forward a little at a time until the picture looks even from top to bottom. A small change in tilt is often enough, and you can repeat it whenever you move the monitor or change where you sit.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch monitor with tilt, a 144 Hz refresh rate and two HDMI ports for a desk setup you can angle to face you.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch monitor with tilt, a 240 Hz refresh rate, two HDMI ports and DisplayPort for a larger screen you can angle to face you.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch monitor with a 120 Hz refresh rate, HDMI and VGA, and a VESA mount, so it can go on a height-adjustable arm.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch monitor with a 100 Hz refresh rate, DisplayPort and two HDMI ports, built-in speakers and a VESA wall mount pattern.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

Why does my monitor stand not move up or down?

Some stands only tilt, so the height stays fixed while the screen angles. Check the manual or spec sheet for height adjustment, and if the stand only tilts, a riser adds the height, or a monitor arm adds the range if your monitor has a VESA mount pattern.

How high should my monitor sit?

Set it so the top of the screen sits level with your eyes when you sit upright in your chair. If you look down at the screen, raise it; if you look up at it, lower it.

Can I use a monitor arm instead of the stand?

Yes, if the monitor has a VESA mount pattern. The Acer KB242Y has a VESA mount and the Sceptre E248W has a VESA wall mount pattern, so either can go on a VESA arm. Remove the stand first, then follow the arm maker's instructions.

Ranked monitors guides