How Easy Is It to Upgrade RAM?
On a desktop with open RAM slots, a RAM upgrade is a short job: shut the PC down, unplug it, open the case, press the sticks into the slots, and close it up. Laptops vary, and some have memory soldered in place, so check the manual for your model first. The kits in this guide are desktop DDR4 and DDR5 memory in matched pairs.
Check what your board takes
A DDR4 stick does not fit a DDR5 board, and a DDR5 stick does not fit a DDR4 board, so check the manual or the board maker's memory list before you buy. Count the RAM slots and note how many are filled. The kits in this guide are two-stick kits: 16 GB, 32 GB and 64 GB of DDR5, and 32 GB of DDR4. Check the speed and timings the board lists, and check the requirements published for your software or game.
Shut down and unplug first
Shut the PC down and unplug it before you open the case, and follow the maker's manual for your model. Touch a bare metal part of the case to ground yourself before you handle the sticks. Open the clips at each end of a free slot, line up the notch on the stick with the key in the slot, and press down until the clips close. Do not force a stick that does not sit flat.
Match the sticks in the kit
The kits in this guide come as two-stick kits, and the sticks in a kit are made to run together. Do not mix memory kits, since mixing kits can cause stability issues or system failure. Install both sticks from the same kit, and keep the old sticks out unless the board manual says the mix is supported. After the install, boot the PC and check that the full capacity shows up.
Set the speed in the BIOS
A new kit may start at the board's default speed, and the rated speed may need the XMP or EXPO profile turned on. The Patriot kit supports XMP 3.0 and AMD EXPO, the two Corsair kits work with AMD EXPO and Intel XMP 3.0, and the G.SKILL kit includes an Intel XMP profile. The Corsair kits note that the top speed needs overclocking or BIOS adjustments. Open the BIOS, pick the profile for your kit, and save the setting.
What you need

Patriot Viper Venom DDR5 RAM
A DDR5 kit of 16 GB in two 8 GB sticks, rated at 6000 MT/s with CL36 timings and support for XMP 3.0 and AMD EXPO.
View on Amazon
CORSAIR Vengeance RS DDR5
A DDR5 kit of 32 GB in two 16 GB sticks, rated up to 6000 MHz with CL38 timings and AMD EXPO and Intel XMP 3.0 support.
View on Amazon
Corsair Vengeance RGB RS DDR5
A DDR5 kit of 64 GB in two 32 GB sticks, rated up to 6000 MHz with CL40 timings, AMD EXPO and Intel XMP 3.0 support, and RGB lighting.
View on Amazon
G.SKILL RipjawsV DDR4 RAM (XMP)
A DDR4 kit of 32 GB in two 16 GB sticks, rated up to 3200 MT/s with CL16 timings and an Intel XMP profile.
View on AmazonThese come from our ranked list Best RAM for PC, which compares them spec by spec.
FAQ
Can I add RAM to a laptop?
It depends on the laptop. Some laptops have open RAM slots, and some have memory soldered in place. Check the manual for your model before you buy, and contact the maker if the manual says the memory is not user replaceable.
Can I mix DDR4 and DDR5 memory?
No. A DDR4 stick does not fit a DDR5 board, and a DDR5 stick does not fit a DDR4 board. Check the manual or the board maker's memory list for the generation your board takes.
Do I need to change settings after installing RAM?
A new kit may start at the board's default speed. Open the BIOS, pick the XMP or EXPO profile for your kit, and save the setting. The Corsair kits note that the top speed needs overclocking or BIOS adjustments.


