How Does Monitor Calibration Work?
Monitor calibration measures the colors your screen shows, compares them with target values, and adjusts the display so the colors come closer to those targets. A sensor reads color patches on the screen, software works out the correction, and the result is saved as a color profile your system applies to the display.
What calibration measures
Calibration starts with measurement. Software displays a series of color and gray patches on the screen, and a colorimeter sensor placed against the panel reads the light each patch produces. The software compares the measured values with the target values you choose for white point, brightness and tone response. The gap between the measured values and the targets shows how far the display sits from the target, and that gap drives the correction in the next step.
How the correction is applied
The software then adjusts the display toward the targets. Some adjustments happen in the monitor's own settings, such as brightness, contrast and the red, green and blue channel levels in the on-screen menu. The remaining correction goes into a color profile and a lookup table that your graphics system applies to every frame. Once the profile is active, applications that read the profile show colors through the correction, so the same file looks consistent from one calibrated screen to the next.
Calibration with and without a sensor
You can adjust a monitor by eye with reference images and the on-screen menu, and that can set brightness and contrast to a usable level. Visual adjustment cannot measure color, so it cannot confirm how close the panel sits to a target. A colorimeter measures the actual light from the panel, which lets the software build the correction from readings instead of guesses. For photo and video work where color decisions matter, the measured route gives a repeatable result you can check again later.
When to calibrate again
A display drifts as the backlight ages and as you change settings such as brightness or the selected color mode. Calibrating again after a settings change or a long stretch of use brings the measured values back toward the targets. Warm the monitor up before you measure, keep room light steady during the session, and save each new profile with a clear name. If you use more than one display, calibrate each one on its own so the profiles match the panel each one was measured on.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch FHD IPS monitor with a 144 Hz refresh rate, 1ms MPRT response and HDMI inputs.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch FHD IPS monitor with a 240 Hz refresh rate, 0.5ms response, 99% sRGB coverage and DisplayPort.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch FHD IPS monitor with a 120 Hz refresh rate, 1ms VRB response and 250 nits brightness.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch monitor with a 100 Hz refresh rate, 100% sRGB coverage, DisplayPort and HDMI inputs and built-in speakers.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Do I need a colorimeter to calibrate a monitor?
No. You can set brightness and contrast by eye with reference images and the on-screen menu. A colorimeter adds measurement, so the software builds the correction from readings of the actual light your panel produces.
What does a color profile do?
A color profile records how your display reproduces color after calibration. Your system and color-aware applications use the profile to adjust output, so colors stay consistent between your screen and other calibrated displays.
Does calibration change my monitor settings?
Yes. Calibration can change brightness, contrast and channel levels in the on-screen menu, and it adds a profile and lookup table in your system. Changing those settings later shifts the result, so calibrate again after big changes.




