How to Connect Your PC to a Monitor
Connect your PC to a monitor with a cable that matches a port on both ends, such as HDMI or DisplayPort. Plug one end into the PC and the other into the monitor, switch the monitor to the right input, and the picture should appear. If the screen stays blank, check the cable, the input setting, and that the PC is awake.
Check the ports on both devices
Look at the back or side of your PC and at the back of the monitor, and write down the ports you see. Most PCs and monitors have HDMI, and many also have DisplayPort. Older monitors may have VGA instead. If your laptop has only USB-C, check that the port supports video output before you buy a cable, since a USB-C port does not always carry video. A port on one device needs a matching port or an adapter on the other.
Pick the right cable
Use a cable with the same connector on both ends when the PC and the monitor share a port. HDMI to HDMI and DisplayPort to DisplayPort are the common choices. When the ports differ, buy a cable or adapter that runs from the port on your PC to the port on the monitor, such as DisplayPort to HDMI. Check the length before you buy, so the cable reaches from the PC to the monitor without pulling tight.
Plug everything in
Plug the cable into the PC first, then into the monitor, and push each end in until it sits firm. On a desktop PC with a graphics card, use the ports on the graphics card rather than the ports on the motherboard. Plug the monitor power cable into the wall and into the monitor, then press the power button on the monitor. Switch the PC on if it is off.
Select the right input on the monitor
Use the buttons on the monitor to open its menu and pick the input that matches the cable you plugged in, such as HDMI or DisplayPort. The picture should appear within a few seconds. If the screen stays blank, press the input button again to step through the inputs, and check that the cable is pushed in at both ends. Also check that the PC is awake and not asleep.
Adjust the display settings
Open the display settings on your PC to choose how the monitor behaves. Pick Extend to use the monitor as extra space beside your laptop screen, or Duplicate to show the same picture on both screens. Set the resolution to the one your monitor lists, such as 1920 x 1080, and pick the refresh rate the monitor supports. If the picture looks stretched, the resolution does not match the monitor.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch FHD monitor with a 144Hz refresh rate, IPS panel, two HDMI ports and tilt.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch FHD monitor with a 240Hz refresh rate, IPS panel, HDMI, DisplayPort and tilt.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch FHD monitor with a 120Hz refresh rate, IPS panel, HDMI, VGA and VESA mounting.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch FHD monitor with a 100Hz refresh rate, HDMI, DisplayPort, built-in speakers and VESA wall mounting.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Why does my monitor say no signal?
The monitor is on the wrong input, the cable is loose, or the PC is asleep. Check the input setting, push the cable in at both ends, and wake the PC by moving the mouse or pressing a key.
Can I connect two monitors to one PC?
Yes, if your PC has a video output for each monitor, or a dock with outputs for both. Connect each monitor with its own cable, pick the right input on each one, and set Extend in your display settings to use both screens.
Do I need a graphics card to connect a monitor?
No. A PC with a video output on the motherboard or the processor connects with a cable from that port. A graphics card adds extra ports and more power for games, but it is not needed for a basic connection.



