Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

BTX Motherboard Form Factor Explained

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

BTX is a motherboard form factor Intel designed as a replacement for ATX, with the processor moved to the front of the board so cool air from the front intake flows straight over it. The layout mirrors the ATX board, puts the memory slots beside the processor and uses a different mounting pattern. BTX never caught on, so BTX boards and cases are rare and ATX remains the choice.

  1. What BTX changed

    BTX rearranged the board around airflow. The processor sits near the front edge, so air from the front intake passes over it first, and the memory slots sit beside the processor in the same stream of air. A thermal module with a duct and a fan moves that air across the processor and out of the case. The graphics slot moved too, and the board layout is a mirror image of ATX, with the ports and slots on the opposite side.

  2. How BTX differs from ATX

    BTX and ATX boards do not swap into the same case. The mounting holes sit in different places, the input and output panel is on the opposite side of the case, and the board needs a BTX case with the matching airflow path. The power supply and drive bays also sit in different spots in a BTX case. Check the case manual for the form factors it supports before buying a board.

  3. Why BTX did not catch on

    Board makers and case makers stayed with ATX, so BTX boards and cases stayed scarce. ATX cases also improved their own airflow with larger fans and better vent placement, which took away much of the reason to switch. With few boards and few cases available, builders had little reason to pick BTX over the ATX parts they already knew. That left BTX as a short-lived design rather than a new standard.

  4. What to buy instead

    For a new build, pick ATX or Micro-ATX, which are the sizes most boards and cases use. Check the case manual for the form factors it supports, then match the board size to it. An ATX board fits an ATX case, and a Micro-ATX board fits both Micro-ATX and ATX cases. If you already own a BTX case, look for a used BTX board made for it, and check the mounting holes and the input and output panel line up before you buy.

What you need

ASUS ROG Strix B550-F Gaming

ASUS ROG Strix B550-F Gaming

An ATX board with an AM4 socket, B550 chipset, DDR4 memory, PCIe 4.0, dual M.2 slots and WiFi 6E.

View on Amazon
GIGABYTE B850 AORUS Elite WIFI7

GIGABYTE B850 AORUS Elite WIFI7

An ATX board with an AM5 socket, B850 chipset, DDR5 memory, PCIe 5.0, three M.2 slots and WiFi 7.

View on Amazon
GIGABYTE B550M K

GIGABYTE B550M K

A Micro-ATX board with an AM4 socket, B550 chipset, DDR4 memory and PCIe 4.0 in a smaller board size.

View on Amazon
MSI PRO B760-P

MSI PRO B760-P

An ATX board with an LGA 1700 socket, B760 chipset, DDR4 memory, PCIe 4.0 and Wi-Fi 6E.

View on Amazon

These come from our ranked list Best Motherboard, which compares them spec by spec.

FAQ

Can a BTX board fit in an ATX case?

No. The mounting holes and the input and output panel sit in different places, so a BTX board needs a case made for BTX.

Can you still buy a BTX motherboard?

New BTX boards are rare. Used boards and cases still change hands, but check the mounting holes and the panel layout match before you buy.

Is BTX better than ATX for cooling?

BTX was designed around airflow, with the processor in the path of the front intake. ATX cases later improved their own airflow, so the gap closed.

Ranked motherboards guides