Best External Drive Enclosure for 5.25 Cd Rom Drive (2026): 4 Picks Compared
Choose the cenmate 5.25" Blu-Ray/CD/DVD SATA Drive Enclosure with USB A/C 3.0 if your optical drive measures up to 171mm deep and you want a USB 3.0 enclosure with hot swapping. Its twin adds 3 USB-A ports, while the Vantec and Dainty enclosures fit drives up to 185mm deep. Every enclosure here uses a USB 3.0 interface, so the choice turns on depth fit, extra ports, and weight.
Your shortlist at a glance
PCKitHQ scores range from 9.2 to 9.8. See how we pick.
| Product and key specifications | Score and retailer |
|---|---|
01![]() Best Overall 5.25-inch Blu-Ray/CD/DVD SATA Drive Enclosure | 9.8PCKitHQ scoreView on Amazon |
02![]() | 9.6PCKitHQ scoreView on Amazon |
03![]() Also Consider NexStar DX2 USB 3.0 External Enclosure | 9.4PCKitHQ scoreView on Amazon |
04![]() Also Consider Dainty 5.25-inch Optical Drive External Enclosure | 9.2PCKitHQ scoreView on Amazon |
A closer look at each configuration
5.25-inch Blu-Ray/CD/DVD SATA Drive Enclosure
score
A 171mm depth fit, USB 3.0 at up to 5Gbps, and hot swapping suit a SATA optical drive.

- Interface
- USB 3.0
- Weight
- 1.08 lb
- Warranty
- 1 year
This enclosure takes a 5.25-inch Blu-Ray, CD, or DVD SATA drive with a depth up to 171mm, and the optical drive is not included. It connects over USB 3.0 at up to 5Gbps, and it works plug and play with no drivers. The SATA protocol interface is supported, and the IDE protocol interface is not supported. The aluminum alloy casing holds the drive, and the enclosure supports hot swapping. It weighs 1.08 lb. The warranty covers 1 year. Drives without screw holes on the side can also be used in this enclosure.
Choose it if
- You need an enclosure for a SATA drive up to 171mm deep
- You want USB 3.0 with plug-and-play setup and no drivers
Consider another if
- You need the 3 USB-A ports of the second cenmate enclosure
- You need a 185mm depth fit like the Vantec enclosure
5.25-inch Blu-Ray/CD/DVD SATA Drive Enclosure
score
The same 171mm depth fit and USB 3.0 speed, plus 3 USB-A ports, suit a drive and extra devices.

- Interface
- USB 3.0
- Weight
- 1.08 lb
- Warranty
- 1 year
This enclosure matches the first cenmate enclosure: it takes a 5.25-inch Blu-Ray, CD, or DVD SATA drive with a depth up to 171mm, and the optical drive is not included. It connects over USB 3.0 at up to 5Gbps and works plug and play with no drivers. The SATA protocol interface is supported, and the IDE protocol interface is not supported. The difference is the hub: three additional USB Type-A ports connect flash drives, keyboards, mice, and more. The aluminum alloy casing holds the drive, and the enclosure supports hot swapping. It weighs 1.08 lb, and the warranty covers 1 year.
Choose it if
- You want 3 USB-A ports beside your optical drive
- You need a SATA enclosure with hot swapping and no drivers
Consider another if
- You need a 185mm depth fit like the Vantec enclosure
- You need the 12V 3A AC adapter of the Vantec enclosure
NexStar DX2 USB 3.0 External Enclosure
score
A 185mm depth fit, a 12V 3A AC adapter, and USB 3.0 suit any-depth SATA optical drives.

- Interface
- USB 3.0
- Weight
- 2.1 lb
- Warranty
- 1 year parts and labor
This enclosure is designed for a 5.25-inch Blu-Ray, CD, or DVD SATA drive and fits any drive depth up to 185mm. It connects over USB 3.0 at 5Gbps and works plug and ready with no drivers, and it is hot swappable on a system with a USB port. A 12V, 3A AC adapter comes with the enclosure to power any optical drive. The aluminum alloy casing holds the drive, and a power saving function is built in. With an optional 5.25-inch mount bracket, it can also mount any SATA 3.5-inch or 2.5-inch HDD or SSD as a storage device. A flexible SATA cable inside connects to any type of SATA optical or storage drive. It weighs 2.1 lb, and the warranty covers 1 year parts and labor.
Choose it if
- You need an enclosure that fits any depth up to 185mm
- You want a 12V 3A AC adapter to power the drive
Consider another if
- You need 3 USB-A ports like the second cenmate enclosure
- You need the 1.08 lb weight of the cenmate enclosures
Dainty 5.25-inch Optical Drive External Enclosure
score
A 185mm depth fit, 3.5-inch and 2.5-inch hard drive support, and USB 3.0 suit mixed drive use.

- Interface
- USB 3.0
- Weight
- 1.1 lb
- Warranty
- 1 Year Limited Warranty
This enclosure kit takes a 5.25-inch Blu-ray, DVD, or CD reader/writer drive with a SATA I or II interface, and the optical drive is not included. It suits drives up to 185mm deep, including Blu-ray drives of 6.77 inches (17.2 cm) and shorter. It also takes 3.5-inch and 2.5-inch SATA I, II, and III hard drives, so one enclosure serves both optical drives and hard drives. It connects over USB 3.0 and works plug and play with no driver. The kit includes the enclosure, a USB 3.0 cable from Standard-A to Standard-B, an external power supply, and a power cable. It weighs 1.1 lb, and the warranty is a 1 Year Limited Warranty.
Choose it if
- You need an enclosure for a SATA drive up to 185mm deep
- You want to use 3.5-inch and 2.5-inch SATA hard drives too
Consider another if
- You need 3 USB-A ports like the second cenmate enclosure
- You need the 1.08 lb weight of the cenmate enclosures
Make the choice for your setup
Drive depth fit: 171mm or 185mm
Depth fit is the first figure to check. The two cenmate enclosures fit any drive depth up to 171mm. The Vantec enclosure fits any drive depth up to 185mm, and the Dainty enclosure suits drives up to 185mm deep. Measure your optical drive from front to back before you buy, then match that depth to the enclosure figure. A drive deeper than 171mm needs the 185mm fit of the Vantec or Dainty enclosure, while a drive at 171mm or less fits all four enclosures here. The 185mm fit of the Vantec and Dainty enclosures covers drives up to 185mm deep.
USB 3.0 speed and hot swapping
Every enclosure here connects over USB 3.0. The cenmate enclosures and the Vantec enclosure state USB 3.0 at up to 5Gbps, and the Dainty enclosure also states a high-speed USB 3.0 interface. The Dainty kit includes a USB 3.0 cable from Standard-A to Standard-B, an external power supply and a power cable. The cenmate enclosures and the Vantec enclosure support hot swapping, and the Vantec enclosure is hot swappable on a system with a USB port. The Dainty enclosure works plug and play with no driver, and the cenmate enclosures need no drivers either. Compare the interface figures with your computer ports, and note the 5Gbps figure of the cenmate and Vantec enclosures. A related shortlist covers the Best External Hard Drive Enclosure for Laptop.
Extra ports, power, and hard drives
The extras separate these four enclosures. The second cenmate enclosure adds 3 USB-A ports for flash drives, keyboards, and mice. The Vantec enclosure comes with a 12V, 3A AC adapter to power any optical drive, and the Dainty kit includes an external power supply and power cable. The Vantec enclosure can mount a SATA 3.5-inch or 2.5-inch HDD or SSD with an optional 5.25-inch mount bracket, and the Dainty enclosure takes 3.5-inch and 2.5-inch SATA hard drives directly. A hub suits extra devices at the desk, while an included adapter suits a drive that needs its own power. Compare the extras with the devices you own, and note the 3 USB-A ports of the second cenmate enclosure.
For a wider shortlist, start with Best SSD Enclosure.
FAQ: External Drive Enclosure for 5.25 Cd Rom Drive
What drive depth do these enclosures fit?
The two cenmate enclosures fit any drive depth up to 171mm. The Vantec enclosure fits any drive depth up to 185mm, and the Dainty enclosure suits drives up to 185mm deep. Measure your drive before you choose an enclosure.
Do these enclosures include the optical drive?
No. The optical drive is not included with any of these four enclosures, so you install your own 5.25-inch SATA Blu-Ray, CD, or DVD drive. The Vantec enclosure mounts SATA hard drives with an optional bracket, and the Dainty enclosure takes them directly.
Which enclosures support hot swapping?
The two cenmate enclosures and the Vantec enclosure support hot swapping. The Vantec enclosure is hot swappable on a system with a USB port. All four enclosures need no drivers, and the cenmate and Dainty enclosures work plug and play.



