Best ATX Full Tower (2026): 4 Picks Compared
If you need room for E-ATX, SSI-EEB, and Threadripper motherboards with dual GPUs up to 495mm long, choose the Antec 900 Full-Tower E-ATX PC Case. Its 6 pre-installed PWM fans, 420mm radiator support, and USB Type-C 3.2 Gen 2 port cover cooling and connectivity for a large build. The other three cases trade radiator size, fan count, and warranty length for a different fit.
Your shortlist at a glance
PCKitHQ scores range from 9.2 to 9.8. See how we pick.
| Product and key specifications | Score and retailer |
|---|---|
01![]() Best Overall Antec 900 Full-Tower E-ATX PC Case | 9.8PCKitHQ scoreView on Amazon |
02![]() | 9.6PCKitHQ scoreView on Amazon |
03![]() Also Consider darkFlash DY470 Full-Tower ATX Gaming PC Case | 9.4PCKitHQ scoreView on Amazon |
04![]() Also Consider ASUS ProArt PA602 E-ATX Full-Tower PC Case | 9.2PCKitHQ scoreView on Amazon |
A closer look at each configuration
Antec 900 Full-Tower E-ATX PC Case
score
Six pre-installed PWM fans, 420mm radiator support, and 9 drive bays define this Antec 900 full-tower case.

- Form factor
- E-ATX
- USB-C
- Yes
- Weight
- 33.07 lb
- Warranty
- 2 years
This Antec 900 is a full-tower E-ATX case that supports E-ATX, SSI-EEB, Threadripper, and Back-Connect motherboards. Its spacious interior fits dual GPUs up to 495mm long and 160mm thick. Cooling comes from 6 pre-installed high-performance PWM fans: 3 140mm fans at the front, 2 120mm reverse fans on the PSU shroud, and 1 140mm fan at the rear. Radiator support runs up to 420mm at the front. Storage covers 9 drive bays with 4 3.5-inch and 2.5-inch combo bays and 5 2.5-inch bays, plus a USB Type-C 3.2 Gen 2 port at 10Gbps. A tool-free 4mm tempered glass side panel, full dust filtration on the front, top and bottom, and reusable PCIe slot covers cover access and maintenance. The case weighs 33.07 lb and carries a 2 years warranty.
Choose it if
- You want E-ATX, SSI-EEB, and Threadripper motherboard support
- You want 6 pre-installed PWM fans with 420mm radiator support
Consider another if
- You need a 3 year warranty on your full-tower case
- You need a case that weighs less than 33.07 lb
Antec Performance 1 FT Full Tower E-ATX PC Case
score
A temperature display, high-airflow mesh front, and dual tempered glass panels define this Antec Performance 1 FT case.

- Form factor
- E-ATX
- Weight
- 27.67 lb
- Warranty
- 2 year
This Antec Performance 1 FT is a full-tower E-ATX case with a high-airflow mesh front panel. A temperature display shows the system status at a glance, and Antec iUnity provides instant data on PC specs. Two cable covers help optimize cable routing, and dual 4mm tempered glass side panels show the build. A Type-C 10Gbps port covers connectivity, and a removable top bracket helps with the build. RTX 40 GPU support covers graphics cards. The case weighs 27.67 lb and carries a 2 year warranty.
Choose it if
- You want a temperature display on the case
- You want a high-airflow mesh front panel
Consider another if
- You need a 3 year warranty on your full-tower case
- You need 6 pre-installed PWM fans in the case
darkFlash DY470 Full-Tower ATX Gaming PC Case
score
Four PWM ARGB fans, dual 360mm radiators, and vertical GPU mounting define this darkFlash DY470 case.

- Form factor
- ATX
- Weight
- 22 lb
- Warranty
- 1 years
This darkFlash DY470 is a full-tower ATX gaming case with 4 PWM ARGB fans. Its dual-chamber layout supports vertical GPU mounting and ATX back-mounted motherboards, with a panoramic glass design and a top-angled glass panel. The spacious interior fits large 410mm GPUs and dual 360mm radiators, with a snap-on design and tidy cable management. A dust filter at the bottom helps keep the case clean, with velcro straps and a back cover that keeps cables tidy. The RGB hub controller is not included. The case weighs 22 lb and carries a 1 years warranty.
Choose it if
- You want vertical GPU mounting with a dual-chamber layout
- You want up to 2 x 360mm radiators in the case
Consider another if
- You need a 3 year warranty on your full-tower case
- You need 6 pre-installed PWM fans in the case
ASUS ProArt PA602 E-ATX Full-Tower PC Case
score
Two 200mm front fans, a 420mm radiator, and a front IR dust indicator define this ASUS ProArt PA602 case.

- Form factor
- E-ATX
- USB-C
- Yes
- Weight
- 35.5 lb
- Warranty
- 3 year
This ASUS ProArt PA602 is an E-ATX full-tower case with one 140mm and two 200mm fans pre-installed. Its 15.5 mm front panel grill with 45% porosity feeds two extra-thick 200 x 38 mm front fans and a 140 mm rear exhaust fan. Two deflectors send incoming air towards the motherboard and other internal components, with a built-in fan hub for fan management. Space covers one 420 mm radiator and 440mm graphics cards, with room for horizontal or vertical mounting. A USB Type-C 20Gbps port, a Power Lock Latch and 2-section PWM control cover connectivity and control. A front panel IR dust indicator reminds you to clean the filter. The case weighs 35.5 lb and carries a 3 year warranty.
Choose it if
- You want two 200mm front fans with a 140mm rear fan
- You want a USB Type-C 20Gbps port on the case
Consider another if
- You need 6 pre-installed PWM fans in the case
- You need dual 360mm radiators in the case
Make the choice for your setup
Compare radiator support
Radiator support differs across these four cases. The Antec 900 supports up to 420mm radiators at the front, and the ASUS ProArt PA602 supports one 420 mm radiator. The darkFlash DY470 supports up to 2 x 360mm radiators, with large 410mm GPUs fitting beside them. The Antec 900 pairs its 420mm radiator support with 6 pre-installed PWM fans, while the ASUS ProArt PA602 pairs its 420 mm radiator with two 200mm front fans and a 140mm rear fan. The Antec Performance 1 FT covers cooling with a high-airflow mesh front panel and a removable top bracket. Compare the radiator size against the cooling you plan to install.
Compare fans and storage
Fan counts differ across these four cases. The Antec 900 ships with 6 pre-installed PWM fans: 3 140mm fans at the front, 2 120mm reverse fans on the PSU shroud, and 1 140mm fan at the rear. The darkFlash DY470 ships with 4 PWM ARGB fans. The ASUS ProArt PA602 ships with one 140mm and two 200mm fans pre-installed. The Antec 900 also covers storage with 9 drive bays: 4 3.5-inch and 2.5-inch combo bays and 5 2.5-inch bays. The ASUS ProArt PA602 adds a built-in fan hub for fan management, and the Antec Performance 1 FT adds a temperature display. Compare the fan count and the drive bays against the build you plan. A related shortlist covers the Best ITX Case.
Weigh weight and warranty
Weights run from 22 lb on the darkFlash DY470 to 35.5 lb on the ASUS ProArt PA602, with the Antec Performance 1 FT at 27.67 lb and the Antec 900 at 33.07 lb. Warranty terms differ too: the Antec 900 carries a 2 years warranty, the Antec Performance 1 FT carries a 2 year warranty, the darkFlash DY470 carries a 1 years warranty, and the ASUS ProArt PA602 carries a 3 year warranty. USB Type-C differs as well: the Antec 900 has a USB Type-C 3.2 Gen 2 port at 10Gbps, the Antec Performance 1 FT has a Type-C 10Gbps port, and the ASUS ProArt PA602 has a USB Type-C 20Gbps port. Compare the weight, the warranty term, and the USB Type-C port before choosing.
Comparing more options? See Best ATX Full Tower Case.
FAQ: ATX Full Tower
Which cases support a 420mm radiator?
The Antec 900 supports up to 420mm radiators at the front, and the ASUS ProArt PA602 supports one 420 mm radiator. The darkFlash DY470 supports up to 2 x 360mm radiators instead, with large 410mm GPUs fitting beside them.
Which cases ship with pre-installed fans?
The Antec 900 ships with 6 pre-installed PWM fans, the darkFlash DY470 ships with 4 PWM ARGB fans, and the ASUS ProArt PA602 ships with one 140mm and two 200mm fans. The Antec Performance 1 FT has a temperature display, a high-airflow mesh front panel, and a Type-C 10Gbps port.
Which cases have a USB Type-C port?
The Antec 900 has a USB Type-C 3.2 Gen 2 port at 10Gbps, the Antec Performance 1 FT has a Type-C 10Gbps port, and the ASUS ProArt PA602 has a USB Type-C 20Gbps port. The ASUS ProArt PA602 also has a Power Lock Latch and 2-section PWM control.



