Best ATX Tower Case (2026): 7 Models Side by Side
Choose the MONTECH TG3 Panoramic ATX PC Case: it ships with 4 pre-installed ARGB fans, clears graphics cards up to 430 mm, and supports nine fan positions. The six other cases below vary in included fans, radiator support, and glass, so compare fan counts and GPU clearance before you pick one.
Your shortlist at a glance
PCKitHQ scores range from 9.2 to 9.8. See how we pick.
| Product and key specifications | Score and retailer |
|---|---|
01![]() | 9.8PCKitHQ scoreView on Amazon |
02![]() | 9.7PCKitHQ scoreView on Amazon |
03![]() Also Consider Thermaltake Tower 600 Black Mid-Tower ATX Case | 9.6PCKitHQ scoreView on Amazon |
04![]() Also Consider Antec C8 Full-Tower E-ATX PC Case | 9.5PCKitHQ scoreView on Amazon |
05![]() Also Consider Zalman T8 ATX Mid Tower Gaming PC Case | 9.4PCKitHQ scoreView on Amazon |
06![]() Also Consider LIAN LI LANCOOL 216 RGB Black ATX Mid-Tower Case | 9.3PCKitHQ scoreView on Amazon |
07![]() Also Consider Zalman S3 Compact ATX Mid-Tower Desktop PC Case | 9.2PCKitHQ scoreView on Amazon |
A closer look at each configuration
MONTECH TG3 Panoramic ATX PC Case
score
ATX case with 4 pre-installed ARGB fans, 430 mm GPU clearance, and nine fan positions.

- Fans included
- 4
- Form factor
- ATX
- Warranty
- 1 year
The MONTECH TG3 Panoramic ATX PC Case ships with 4 pre-installed ARGB fans: a GF360 U REV single-frame side intake and a GF120 U rear exhaust. Its ventilated panels support up to nine fan positions: three on top, three on the side, two on the power supply shroud, and one at the rear. The interior clears graphics cards up to 430 mm, CPU coolers up to 180 mm, and ATX power supplies up to 250 mm. Back-connect motherboards are supported alongside standard ATX, Micro-ATX, and Mini-ITX boards. The warranty runs 1 year.
Choose it if
- You want 430 mm of GPU clearance
- You want nine cooling positions in total
Consider another if
- You want a 3-year manufacturer warranty
- You want more than 4 included fans
Antec P7 S Mid-Tower ATX PC Case
score
ATX mid tower with 4 PWM fans, sound-dampening side panels, and 360 mm top radiator support.

- Fans included
- 4
- Form factor
- ATX
- USB-C
- Yes
- Weight
- 15.9 lb
- Warranty
- 2 years
The Antec P7 S Mid-Tower ATX PC Case ships with 4 PWM fans: three 120 mm fans at the front and one 120 mm fan at the rear. Its brushed front panel has a dual side mesh design, and sound-dampening foam on both side panels reduces noise. It supports a 360 mm radiator at the top, with a large bottom intake and 30 mm clearance for GPU cooling. USB Type-C 3.2 Gen 2 is included. The case weighs 15.9 lb, and the warranty runs 2 years.
Choose it if
- You want 4 pre-installed PWM fans
- You want USB Type-C 3.2 Gen 2
Consider another if
- You want a 3-year manufacturer warranty
- You want more than 4 included fans
Thermaltake Tower 600 Black Mid-Tower ATX Case
score
ATX mid tower with three tempered glass panels, radiators up to 420 mm, and rotational PCIe slots.

- Form factor
- ATX
- Weight
- 21.39 lb
- Warranty
- 3 Year
The Thermaltake Tower 600 Black Mid-Tower ATX Case has an octagonal design with three tempered glass panels that remove without tools. It supports hidden-connector motherboards from ASUS BTF, MSI PROJECT ZERO, and GIGABYTE PROJECT STEALTH. Cooling support covers up to nine fans and radiators up to 420mm. Rotational PCIe slots and a floating VGA bracket give flexible GPU installation. An optional horizontal display stand kit is available. The case weighs 21.39 lb, and the warranty runs 3 Year.
Choose it if
- You want three tempered glass panels
- You want radiators up to 420 mm
Consider another if
- You want a case under 21.39 lb in weight
- You want more than nine fan positions
Antec C8 Full-Tower E-ATX PC Case
score
E-ATX full tower with dual chambers, tempered glass panels, and USB Type-C, with no fans included.

- Form factor
- E-ATX
- USB-C
- Yes
- Weight
- 23.14 lb
- Warranty
- 2 years
The Antec C8 Full-Tower E-ATX PC Case ships with no fans: fans are not included, so you add your own. Its dual-chamber design has tempered glass front and side panels. Space covers three 140mm fans or two 160mm fans on the top and bottom, and thick 360mm radiators fit on the top, bottom, and side at the same time. USB Type-C is included. The case weighs 23.14 lb, and the warranty runs 2 years.
Choose it if
- You want a dual-chamber full tower
- You want USB Type-C on the case
Consider another if
- You want included fans in the box
- You want a case under 23.14 lb in weight
Zalman T8 ATX Mid Tower Gaming PC Case
score
Compact ATX case with one 120 mm rear fan, a 5.25-inch ODD bay, and 295 mm GPU support.

- Form factor
- ATX
- Weight
- 7 lb
- Warranty
- 1 Year
The Zalman T8 ATX Mid Tower Gaming PC Case ships with one preinstalled 120mm rear fan, and a total of 4 fans can be installed. Its 5.25-inch ODD slot has a removable front cover, and an RGB LED strip sits on the front panel. The top PSU slot gives the power supply dedicated cooling. CPU coolers up to 160mm fit, graphics cards up to 295mm fit, and the front takes a 240mm radiator. The case weighs 7 lb, and the warranty runs 1 Year.
Choose it if
- You want a 5.25-inch ODD bay
- You want a compact ATX case
Consider another if
- You want more than one included fan
- You want 430 mm of GPU clearance
LIAN LI LANCOOL 216 RGB Black ATX Mid-Tower Case
score
E-ATX mid tower with two 160 mm ARGB front fans, one 140 mm rear fan, and 392 mm GPU clearance.

- Form factor
- E-ATX
- Weight
- 23.15 lb
- Warranty
- 1 year
The LIAN LI LANCOOL 216 RGB Black ATX Mid-Tower Case ships with two 160mm ARGB front fans and one 140mm rear fan pre-installed. Fine mesh panels at the front, top, and PSU shroud side aid ventilation. Graphics cards up to 392mm fit, with 180mm of height in air cooling mode, and a 360mm radiator fits at the top. The case supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards. Storage covers two 3.5-inch HDDs and six 2.5-inch SSDs. The case weighs 23.15 lb, and the warranty runs 1 year.
Choose it if
- You want two 160 mm ARGB front fans
- You want 392 mm of GPU clearance
Consider another if
- You want a 3-year manufacturer warranty
- You want a case under 23.15 lb in weight
Zalman S3 Compact ATX Mid-Tower Desktop PC Case
score
Compact ATX case with 3 pre-installed 120 mm fans, a full acrylic side panel, and 330 mm GPU support.

- Form factor
- ATX
- Weight
- 8.38 lb
- Warranty
- 2 year
The Zalman S3 Compact ATX Mid-Tower Desktop PC Case ships with 3 120mm quiet fans pre-installed. Its full acrylic side panel shows the build, and the brushed front panel has a dual intake design with a metal finish. Graphics cards up to 330mm fit, and the front radiator takes up to 120mm. Up to 8 fans can be installed, with top and bottom dust filters. The case weighs 8.38 lb, and the warranty runs 2 year.
Choose it if
- You want 3 pre-installed 120 mm fans
- You want a full acrylic side panel
Consider another if
- You want 430 mm of GPU clearance
- You want a 3-year manufacturer warranty
Make the choice for your setup
Compare included fans
Included fans differ across these cases. The MONTECH TG3 ships with 4 pre-installed ARGB fans, and the Antec P7 S ships with 4 PWM fans. The LIAN LI LANCOOL 216 RGB ships with two 160mm ARGB front fans and one 140mm rear fan. The Zalman S3 ships with 3 120mm quiet fans, and the Zalman T8 ships with one 120mm rear fan, with room for 4 fans in total. The Antec C8 ships with no fans, so you add your own. The Thermaltake Tower 600 supports up to nine fans. Count the included fans against the fans your build needs.
Check GPU clearance and radiators
GPU clearance runs from 295mm on the Zalman T8 to 330mm on the Zalman S3, 392mm on the LIAN LI LANCOOL 216 RGB, and 430 mm on the MONTECH TG3. Radiator support varies: the Antec P7 S takes a 360 mm radiator at the top, the Thermaltake Tower 600 takes radiators up to 420mm, and the Antec C8 takes thick 360mm radiators on the top, bottom, and side at the same time. The Zalman T8 takes a 240mm front radiator, and the Zalman S3 takes a 120mm front radiator. The LIAN LI LANCOOL 216 RGB takes a 360mm radiator. Match the GPU length and radiator size to your parts. For a closely related choice, read our guide to the Best ATX Case for Water Cooling.
Weigh form factor, weight, and warranty
Form factor runs from ATX on the MONTECH TG3, the Antec P7 S, the Thermaltake Tower 600, the Zalman T8, and the Zalman S3, to E-ATX on the Antec C8 and the LIAN LI LANCOOL 216 RGB. Weight runs from 7 lb on the Zalman T8 and 8.38 lb on the Zalman S3 to 15.9 lb on the Antec P7 S, 21.39 lb on the Thermaltake Tower 600, 23.14 lb on the Antec C8, and 23.15 lb on the LIAN LI LANCOOL 216 RGB. Warranties run 1 year on the MONTECH TG3, the Zalman T8, and the LIAN LI LANCOOL 216 RGB, 2 years on the Antec P7 S, the Antec C8, and the Zalman S3, and 3 Year on the Thermaltake Tower 600. Match the form factor and weight to your desk and build.
Before you decide, also read Best ATX Full Tower Case.
FAQ: ATX Tower Case
Which ATX tower case should I choose first?
Choose the MONTECH TG3 Panoramic ATX PC Case. It ships with 4 pre-installed ARGB fans, clears graphics cards up to 430 mm, and supports nine fan positions. Back-connect motherboards are supported, and the warranty runs 1 year.
Which cases include USB Type-C?
The Antec P7 S includes USB Type-C 3.2 Gen 2, the Antec C8 includes USB Type-C, and the MONTECH TG3 lists Type-C. The Zalman T8 and the Zalman S3 name USB 3.0 on their interfaces instead.
Which case lets you choose every fan?
The Antec C8 gives you room for three 140mm fans or two 160mm fans on the top and bottom, and thick 360mm radiators fit on the top, bottom, and side at the same time. Fan brackets at the bottom take 120mm or 140mm fans.



