Are Dual Monitor Stands Universal?
No, dual monitor stands are not universal. A stand fits only monitors whose mounting holes, screen size and weight fall inside the stand's limits. Check the mounting pattern on the back of each monitor, the screen size the stand supports and the weight each arm holds before you buy.
What makes a stand fit
A stand holds a monitor by the screw holes on its back, arranged in a square pattern. The stand takes certain patterns, and the pattern on the back of the monitor must match the one the stand takes. If the two do not match, the monitor cannot bolt to the arm. Check the back of your monitor for mounting holes before choosing a stand.
Check screen size and weight
Stands set a screen size range and a weight limit for each arm, and both matter. A 24-inch screen and a 27-inch screen can sit side by side on a dual stand only when the stand takes both sizes and each arm holds the monitor's weight. Compare the weight of each monitor with the limit printed for the arm, since a heavier screen strains the joint and can sag or drift.
Match two monitors on one stand
Two monitors on one stand look right when they share the same screen size and sit at the same height. A 24-inch screen next to a 27-inch screen leaves the tops uneven, and the arms may need different heights to line up. Check that both monitors use the same mounting pattern and that the stand's arms adjust far enough apart to hold both screens without their edges pressing together.
Check the desk and the clamp
A dual stand clamps to the back edge of a desk or bolts through a hole in it, so check how your desk is built. A clamp needs a flat edge with room underneath for the bracket, and a grommet mount needs a hole in the right place. Measure the thickness of the desk edge and compare it with the range the stand takes before you order.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch 1920x1080 IPS monitor with a 144 Hz refresh rate, HDMI and a listed weight of 7.43 lb.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch 1920x1080 IPS monitor with a 240 Hz refresh rate, HDMI and DisplayPort, with a listed weight of 8.2 lb.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch 1920x1080 IPS monitor with a 120 Hz refresh rate and HDMI, VESA mountable for a stand arm.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch 1920x1080 monitor with a 100 Hz refresh rate, DisplayPort and two HDMI ports, with a VESA mount pattern for a stand arm.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Can any monitor fit on a dual monitor stand?
No. The monitor needs mounting holes on its back that match the pattern the stand takes, and its screen size and weight must fall inside the stand's limits. Check the monitor's manual and the stand's specs before you buy.
Do both monitors need to be the same size?
No, but matching sizes line up better. A 24-inch screen next to a 27-inch screen leaves the tops uneven, and the stand may need different arm heights to level them. Two screens of the same size sit at the same height with less adjustment.
Will a dual stand hold two 27-inch monitors?
It can when the stand takes 27-inch screens and each arm holds the weight of the monitor on it. Check the weight limit for one arm, not the total for the stand, and check the screen size range before you order.



