Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

Are All Monitor Arms Universal?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

No. A monitor arm fits only when the VESA pattern, the weight and the screen size all match the arm's figures. A monitor without a VESA pattern cannot bolt to a standard arm at all, and a screen heavier than the arm's limit sags or drops. Check those three figures on the monitor and the arm before you buy.

  1. Check the VESA pattern on the back

    Look at the screw holes on the back of the monitor and check the spacing shown for them. The arm states which VESA patterns it takes, and the two must match. The Acer KB242Y G0bi is VESA mountable and the Sceptre E248W-FW100T has a VESA wall mount pattern, so both state the mounting they support. A monitor with screw holes on the back bolts to a standard arm.

  2. Match the weight to the arm's limit

    Weigh the monitor with its stand off, since the arm carries the panel alone. The monitors here range from 5.8 lb on the Sceptre E248W-FW100T to 8.2 lb on the Dell SE2726HG, with the Dell SE2426H at 7.43 lb and the Acer KB242Y G0bi at 7.72 lb. Compare that weight with the maximum load the arm states. A screen over the limit tilts forward or will not stay where you put it.

  3. Check the screen size the arm takes

    Arms list a screen size range as well as a weight limit, and a screen outside that range can sit wrong on the mount even when the weight fits. The monitors here are 23.8-inch, 24-inch and 27-inch screens: the Dell SE2426H and the Acer KB242Y G0bi are 23.8-inch, the Sceptre E248W-FW100T is 24-inch, and the Dell SE2726HG is 27-inch. Match the screen size to the range the arm states before you buy.

  4. Check the ports and the desk mount

    An arm changes where the screen sits, not which cables it needs. The monitors here connect over HDMI, and the Dell SE2726HG and the Sceptre E248W-FW100T also have DisplayPort, while the Acer KB242Y G0bi also has VGA. Keep the cables long enough to reach the monitor at full arm extension. Also check how the arm clamps to the desk: a thick desk edge or a glass top may not suit a clamp mount, so check the clamp range the arm states.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch monitor at 7.43 lb with a 144 Hz IPS panel and 2 HDMI ports, a size and weight to check against the arm.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch monitor at 8.2 lb with a 240 Hz IPS panel, DisplayPort and HDMI, a heavier screen to check against the arm's weight limit.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch monitor at 7.72 lb that is VESA mountable, with a 120 Hz IPS panel and HDMI and VGA inputs.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch monitor at 5.8 lb with a VESA wall mount pattern, a 100 Hz panel, DisplayPort and HDMI ports, and built-in speakers.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

Are all monitor arms universal?

No. An arm fits when the VESA pattern, the weight and the screen size all match the arm's figures. A monitor with no VESA pattern needs an adapter or a different mount.

How do I know if my monitor fits an arm?

Check the back of the monitor for screw holes and the spacing shown there, then weigh the panel and check its screen size. Compare all three with the pattern, load limit and size range the arm states.

What can I do if my monitor has a different mounting?

A standard arm bolts to VESA screw holes on the back. A VESA adapter that clamps to the frame fits some monitors, and a desk stand fits others. Check the monitor manual for the mounting it supports before you buy an arm.

Ranked monitors guides