Why Are Mechanical Keyboards Expensive?
Mechanical keyboards cost more than membrane keyboards because each key has its own mechanical switch, and the boards add hot-swap sockets, lubed stabilizers, layered dampening, PBT keycaps and RGB lighting. Those parts cost more to make and to assemble than a single rubber membrane sheet. The four keyboards below show where the money goes, from hot-swappable switches to magnetic hall-effect switches.
One switch under each key
A mechanical keyboard puts a separate switch under each key, and each switch is its own part. The AULA F75 Pro boards use LEOBOG reaper and star vector switches, the Redragon K671 uses linear red switches, and the WIN60 HE uses hall effect magnetic switches. Each switch must be made and fitted, which adds parts and assembly work compared with a membrane sheet, where one sheet covers all the keys.
Hot-swap sockets and lubed parts
Hot-swappable boards add sockets so you can change switches without soldering, and the F75 Pro takes 3-pin or 5-pin switches. The F75 Pro also has pre-lubed stabilizers and pre-lubed switches, plus five layers of silencer and a silicone pad between the plate and the board. Each of those parts adds material and assembly, and lubed parts take extra work before the board ships.
Keycaps, lighting and wireless
The F75 Pro has side-printed PBT keycaps made with double injection molding, and 16.8 million RGB colors with 16 preset lighting effects. It also connects through Bluetooth 5.0, 2.4GHz wireless or USB-C, and runs on a 4000mAh battery, with a knob for the lights and volume. The WIN60 HE also has PBT keycaps and 16.8 million RGB colors. Each feature adds parts, and wireless adds a battery and a radio.
Magnetic switches and fast polling
The WIN60 HE uses hall effect magnetic switches that actuate without physical contact, with an 8000 Hz polling rate and a rapid trigger step of 0.02mm. Its web-based driver lets you remap keys and set macros without downloading software. Magnetic switches and the parts that read them add hardware to the board, and the web-based driver adds software work.
What you need

AULA F75 Pro Wireless Mechanical Keyboard
A 75% wireless keyboard with LEOBOG reaper switches, hot-swappable sockets, RGB lighting and a 4000mAh battery.
View on Amazon
AULA F75 Pro Wireless Mechanical Keyboard
A 75% wireless keyboard with LEOBOG star vector switches, hot-swappable sockets, RGB lighting and side-printed PBT keycaps.
View on Amazon
Redragon Mechanical Gaming Keyboard Wired
A wired keyboard with hot-swappable red switches, 11 backlit modes, anti-ghosting and a 24-month warranty.
View on Amazon
Aula WIN60 HE
A 60% wired keyboard with hall effect magnetic switches, an 8000 Hz polling rate and RGB lighting.
View on AmazonThese come from our ranked list Best Mechanical Keyboard, which compares them spec by spec.
FAQ
Do all mechanical keyboards cost the same?
No. The boards here differ in switches, layout and extras: the AULA F75 Pro has tri-mode wireless and a 4000mAh battery, the Redragon K671 is wired with 11 backlit modes, and the WIN60 HE has magnetic switches with an 8000 Hz polling rate.
What makes one mechanical keyboard cost more than another?
The switches, the keycaps and the extras. Hot-swap sockets, lubed stabilizers, layered dampening, PBT keycaps, RGB lighting and wireless each add parts and assembly work.
Can I change the switches later?
On a hot-swappable board, yes. The AULA F75 Pro and the Redragon K671 both support swapping switches without soldering, and the F75 Pro takes 3-pin or 5-pin switches. The WIN60 HE is hot swappable too.




