Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

What Are Thocky Keyboard Switches?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A thocky switch makes a deep, low, rounded thock when the key bottoms out, instead of a sharp clack or a high click. The sound comes from the switch, the mounting, the dampening inside the case and the keycaps working together. Listen for that low thock in sound demos and read how the board is built before you buy.

  1. What thocky means

    Thocky describes a deep, low-pitched sound with a rounded end, the sound of a key landing with a soft thud rather than a sharp snap. It sits at the opposite end from a high-pitched clack, which sounds thin and bright. The word describes sound only, so it says nothing about how heavy a key feels or how far it travels. Two boards can both be called thocky and still sound different from each other, since the case, the plate and the keycaps all shape the final sound.

  2. What makes a switch sound thocky

    Start with the switch. Linear switches travel straight down with no bump, and lubed switches and stabilizers move with less rattle, which keeps the sound low and clean. The EPOMAKER F75 MAX uses factory-lubed linear switches and stabilizers, and its Reaper switches sit under south-facing LEDs. Next comes the mount. A gasket mount holds the plate on soft gaskets instead of fixing it hard to the case, so the board has more flex and a softer landing. Foam and silicone layers between the plate, the circuit board and the case soak up echo, and pads under the switches bring out a mellow tone.

  3. Membrane boards and thocky sound

    A keyboard can sound thocky without a mechanical switch. The two AULA S99 boards are membrane keyboards, not mechanical keyboards, and they do not support hot-swapping, so their switches cannot be changed. Their sound comes from the membrane design and the case, not from a swap of switches. If you want to change switches later, look for a hot-swappable mechanical board instead. The Redragon K745 PRO socket accepts almost any 3-pin or 5-pin switch, and the EPOMAKER F75 MAX is hot-swappable and works with 3-pin and 5-pin mechanical switches.

  4. How to pick a thocky keyboard

    First, check the switch type and whether the board is hot-swappable, since that decides if you can change switches later. Then look at the mount and the dampening: gasket mounts and foam layers point to a softer, deeper sound. The Redragon K745 PRO pairs a gasket mount with 5-layer noise dampening and PBT keycaps, while the EPOMAKER F75 MAX pairs a gasket mount with foam and silicone layers. Last, check the layout and the connection. The AULA boards are 99-key boards with a number pad, the Redragon is a full-size 108-key board, and the EPOMAKER is a 75% board. All four boards in this guide offer Bluetooth and 2.4GHz wireless, and each one also works wired.

What you need

AULA 99 Key Keyboard

AULA 99 Key Keyboard

A 99-key membrane keyboard with RGB backlight, tri-mode BT/2.4GHz/USB-C connection and a 2000mAh battery, with a thocky, creamy sound.

View on Amazon
AULA S99 Wireless Keyboard

AULA S99 Wireless Keyboard

A 99-key membrane keyboard with a media knob, RGB backlight and tri-mode connection, and a creamy, thocky sound.

View on Amazon
Redragon K745 PRO Wireless 108-Key Gasket RGB Gaming Keyboard

Redragon K745 PRO Wireless 108-Key Gasket RGB Gaming Keyboard

A full-size 108-key gasket-mounted keyboard with 5-layer noise dampening, hot-swappable sockets for 3-pin or 5-pin switches and PBT keycaps.

View on Amazon
EPOMAKER X Aula F75 MAX Wireless Mechanical Keyboard

EPOMAKER X Aula F75 MAX Wireless Mechanical Keyboard

A 75% layout mechanical keyboard with Reaper switches, a gasket mount, a TFT screen and knob, hot-swappable sockets and RGB backlight.

View on Amazon

These come from our ranked list Best Thocky Keyboard, which compares them spec by spec.

FAQ

Can a membrane keyboard sound thocky?

Yes, in the sense the word is used for sound. The AULA S99 boards are membrane keyboards with a creamy, thocky sound. What you cannot do with them is change the switches, since they do not support hot-swapping.

Do I need to lube switches for a thocky sound?

No. Lubed switches help, and some boards arrive with factory-lubed switches and stabilizers, like the EPOMAKER F75 MAX. The mount, the foam layers and the keycaps shape the sound too, so a board can sound deep without any work from you.

What should I check before buying a thocky keyboard?

Check the switch type, the mount, the dampening layers and whether the board is hot-swappable. Then check the layout, such as 99-key, 108-key or 75%, and the connection, since all four boards here offer Bluetooth, 2.4GHz wireless and a wired mode.

Ranked keyboards guides