What Is a Thocky Keyboard?
A thocky keyboard is a keyboard that makes a deep, low-pitched thock sound with each keypress, instead of a sharp click or a high clack. The sound comes from the switches, keycaps, case and dampening inside the board working together. Many thocky keyboards are mechanical, but some membrane models are built for the same sound.
What makes the thock sound
The thock comes from several parts at once. The switch sets the base tone when the stem hits the bottom of the housing, and a heavier, softer landing sounds deeper than a hard snap. Thick keycaps add mass and mute the higher tones, while foam and silicone between the plate, circuit board and case soak up echo and rattle. A gasket-mounted board, where the plate sits on soft gaskets instead of hard screws, flexes a little with each press and softens the landing further. The case shape and material add the last part of the tone.
Thocky, clicky and clacky
Thocky, clicky and clacky describe the sound a key makes, not the size or layout of the board. A clicky switch adds a sharp click as the key goes down, and a clacky board sounds higher and harder, like plastic tapping plastic. A thocky board sounds lower and rounder, closer to a soft knock than a snap. The same layout can sound thocky, clicky or clacky, so the sound tells you about the switches and build, not about the number of keys. Listen for the tone you want before you judge a board by its looks.
Parts that shape the sound
Several parts shape the sound most: the switch, the keycaps, the mounting and the dampening. Linear switches with a smooth press tend to sound deeper than switches with a sharp tactile bump or click, and lubed switches and stabilizers cut rattle. Thick PBT keycaps sound lower than thin ABS caps. A gasket mount and foam layers between the plate and case soften the landing and remove echo. Changing a part changes the tone, so a board with foam and a gasket mount starts closer to thocky than a bare board.
How to pick a thocky keyboard
Start with the build: a gasket-mounted board with foam or silicone dampening and thick keycaps gives you the base for a thocky sound. Check whether the switches can be swapped, so you can try a different switch later without buying a new board. Check the layout and connection modes against your desk and devices: a full-size board with a number pad suits a desk setup, while a smaller layout frees space. Read the switch and mount details before you order, since the sound comes from the build, not from the lights.
What you need

AULA 99 Key Keyboard
A 99-key membrane keyboard with RGB backlight and tri-mode Bluetooth, 2.4GHz and USB-C connections.
View on Amazon
AULA S99 Wireless Keyboard
A 99-key membrane keyboard with a number pad, RGB backlight, tri-mode connections and a media knob.
View on Amazon
Redragon K745 PRO Wireless 108-Key Gasket RGB Gaming Keyboard
A full-size 108-key gasket-mounted keyboard with 5-layer noise dampening, PBT keycaps and tri-mode connections.
View on Amazon
EPOMAKER X Aula F75 MAX Wireless Mechanical Keyboard
A 75% layout mechanical keyboard with hot-swappable Reaper switches, a TFT screen, a knob and RGB backlight.
View on AmazonThese come from our ranked list Best Thocky Keyboard, which compares them spec by spec.
FAQ
Is a thocky keyboard always mechanical?
No. A thocky sound is not limited to mechanical boards. The AULA S99 is a membrane keyboard with a thocky sound, so the sound comes from the build, not only from the switch type.
Can I make my keyboard sound more thocky?
You can change the parts that shape the sound. On a hot-swappable board, try different switches, and add foam or swap in thicker keycaps. The EPOMAKER F75 MAX is hot-swappable, so its switches can be changed.
Does a thocky keyboard sound the same on any computer?
Yes. The sound comes from the keyboard itself, so it stays the same across computers. Connection modes change how the board links to a device, not how the keys sound. A hard desk and bare walls make the sound louder than a soft surface does.




