What Do O-Rings Do on a Keyboard?
O-rings are small rubber rings that fit on a keyboard switch under the keycap, and they cushion the keycap when it bottoms out. That makes typing quieter and the landing softer, with slightly shorter travel. They fit mechanical keyboards with removable keycaps, such as the hot-swappable boards below; the membrane board below does not take them.
What an O-ring is
An O-ring is a small rubber ring that slides onto the stem of a mechanical keyboard switch, under the keycap. It sits between the keycap and the switch housing. When you press the key fully down, the keycap lands on the ring instead of hard plastic.
What O-rings change when you type
O-rings cushion the landing when a key bottoms out, so the clack of the keycap hitting the switch gets quieter and the press feels softer. They also shorten the travel a little, since the ring takes up space between the keycap and the housing. They do not change the switch itself: the force that starts the press stays the same, and the key still registers the same way.
Which keyboards take O-rings
O-rings fit mechanical keyboards with removable keycaps, where each key has its own switch stem for the ring to sit on. The YUNZII, SOLAKAKA and KiiBoom keyboards here are mechanical and hot-swappable, so rings fit them. The AULA S99 is a membrane keyboard and does not support hot-swapping, so it is not a board to fit rings to.
How to fit O-rings
Pull the keycap off the switch with a keycap puller; the SOLAKAKA A99 Pro comes with one. Slide one ring onto the stem of the switch, then press the keycap back on until it sits flat. Work through the keys you use most first, then type on them and add rings to the rest if you like the feel.
What you need

AULA S99 Gaming Keyboard
A 96% membrane keyboard with a number pad, RGB backlight and tri-mode wireless; it does not support hot-swapping.
View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue
A 96% wireless mechanical keyboard with hot-swappable Milk switches, a gasket mount and RGB backlight.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A 96% wireless mechanical keyboard with hot-swappable LEOBOG switches, a gasket structure and a keycap puller in the box.
View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard
A 96% wireless mechanical keyboard with hot-swappable Mochi switches, a gasket mount and RGB backlight.
View on AmazonThese come from our ranked list Best 96 Keyboard, which compares them spec by spec.
FAQ
Do O-rings change the sound of a keyboard?
No. They cushion the keycap landing, but the switch still clicks or taps as it moves. For a board with noise-dampening built in, start with a gasket-mount board such as the YUNZII, SOLAKAKA or KiiBoom boards below.
Do O-rings change how a key feels?
Yes, a little. The landing gets softer and the travel gets slightly shorter, while the force that starts the press stays the same. If you like a firm landing, skip them.
Can I remove O-rings after fitting them?
Yes. Pull the keycap off, slide the ring off the switch stem and press the keycap back on. The keyboard returns to its original feel with no changes left behind.




