Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

What Are Keyboard Stabilizer Types?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Keyboard stabilizers are the small parts under long keys, such as the spacebar, Enter, Shift and Backspace, that keep each key level as it moves down. Without them, a long key would tilt and stick when pressed off-center. The main types are plate-mount and PCB-mount stabilizers, and PCB-mount versions come in clip-in and screw-in forms. Lubrication and tuning affect how they feel and sound.

  1. What a stabilizer does

    A stabilizer supports a long key at both ends so it travels straight down. A wire links the two ends, so pressing one side of the key moves the other side with it. That keeps the press even and stops the key from wobbling or catching. Stabilizers sit under the keycap, next to the switch, and they work on the keys that are too wide for one switch alone. When a stabilizer is loose or dry, the key can rattle or feel uneven.

  2. Plate-mount stabilizers

    Plate-mount stabilizers clip into the metal plate that holds the switches. The plate carries the stabilizer, so the stabilizer comes out with the plate when the keyboard is taken apart. This type is common in keyboards built around a plate, and it is simple to fit because the clips hold it in place. The KiiBoom Phantom98 Lite uses a plate-mounted setup with pre-lubricated stabilizers. Check your keyboard's notes to see whether it uses a plate mount before buying replacements.

  3. PCB-mount stabilizers

    PCB-mount stabilizers attach to the circuit board instead of the plate. Clip-in versions push into holes in the board and are held by clips, while screw-in versions fasten to the board with screws. Screw-in stabilizers stay fixed to the board, so they move less than clip-in versions when a key is pressed hard. Either form still needs the right board layout and the right key sizes, so match the stabilizer to the keyboard you own.

  4. Lubrication and tuning

    Lubrication coats the moving parts of a stabilizer so they slide rather than scrape, and tuning adjusts the wire and housings so the key moves evenly. The YUNZII B98 PRO has tuned stabilizers with pre-lubed switches, the SOLAKAKA A99 Pro has pre-lubricated stabilizers, and the KiiBoom Phantom98 Lite has pre-lubricated stabilizers that reduce rattling. A stabilizer that is already lubricated at the factory needs no extra work from the reader. If a key still rattles, check the maker's manual for that keyboard.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A 96% membrane keyboard with tri-mode Bluetooth, 2.4GHz and USB-C connections, RGB backlight and full-key macro programming.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A 96% wireless mechanical keyboard with Milk V2 linear switches, hot-swap support, a gasket mount, tuned stabilizers and QMK/VIA control.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A 96% wireless mechanical keyboard with LEOBOG switches, hot-swap support, a gasket structure, pre-lubricated stabilizers and an LCD screen.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A 96% wireless mechanical keyboard with Mochi switches, hot-swap support, a gasket mount, plate-mounted pre-lubricated stabilizers and VIA control.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Which keys need stabilizers?

Long keys need them, such as the spacebar, Enter, Shift and Backspace. Short keys use one switch alone, while a long key needs support at both ends to travel straight down.

Do pre-lubricated stabilizers change the sound?

Yes, in the keyboards here they are linked to a smoother feel and less rattling. The KiiBoom Phantom98 Lite says its pre-lubricated stabilizers eliminate unwanted rattling, and the YUNZII B98 PRO pairs tuned stabilizers with pre-lubed switches.

Can any stabilizer fit any keyboard?

No. A stabilizer must match the keyboard's mount, board layout and key sizes. Plate-mount and PCB-mount stabilizers fit different keyboards, so check the maker's notes for your model before buying a replacement.

Ranked keyboards guides