Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

Keyboard O-Ring Sizes Explained

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Keyboard O-ring size is the thickness and inner diameter of the small rubber ring that slides onto a mechanical switch stem under the keycap. The inner diameter must match the stem so the ring stays in place, and the thickness sets how much key travel the ring removes. Match the ring to your switch type before buying a pack.

  1. What an O-ring size means

    An O-ring size has two parts: the thickness of the ring and the inner diameter of its hole. The inner diameter must fit the stem of your switch, so the ring sits flat and stays in place when you press the key. The thickness sets how far the key can travel before it bottoms out, so a thicker ring cuts more travel and softens the landing, while a thinner ring changes less. Read both figures on the pack and compare them with your switch type before you buy.

  2. Check your switches first

    O-rings only fit mechanical switches with keycaps you can pull off. Pull one keycap and look at the stem underneath: if the cap lifts off a cross-shaped stem, rings made for that stem shape will fit. O-rings sit on the cross-shaped stem under a mechanical keycap, so confirm your keyboard has that stem shape before ordering rings. Check your keyboard's switch type in its manual or listing before ordering rings.

  3. Thicker rings change the feel more

    Thickness is the choice that changes how the keyboard feels. A thicker ring stops the key sooner, so the press feels shorter and the bottom of the press feels softer and quieter. A thinner ring keeps more of the original travel and changes the sound less. If you are unsure, fit one ring to a single key first and type on it before you ring the whole board.

  4. Fit one key first

    Pull a keycap with a keycap puller, slide the ring down over the stem until it sits flat, then press the keycap back on. Press the key a few times and check that it still types and the cap sits level with its neighbors. If the key feels dead or the cap wobbles, the ring is the wrong size for that stem. Only ring the rest of the board once the first key feels right.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A 96% membrane keyboard with Bluetooth 5.0, 2.4GHz and USB-C, RGB backlight, a number pad and programmable macros.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A 96% mechanical keyboard with hot-swappable Milk V2 linear switches, so you can pull the keycaps and fit O-rings onto the stems.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A 96% mechanical keyboard with 97 keys and hot-swappable LEOBOG star vector switches, with a keycap puller in the box for fitting O-rings.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A 96% mechanical keyboard with 97 keys and hot-swappable Mochi switches, so keycaps come off and O-rings can sit on the stems.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Do O-rings fit any keyboard?

No. They fit mechanical switches with keycaps that pull off, so the ring can sit on the stem. Check that your keyboard uses mechanical switches with pull-off keycaps before you buy rings.

Will O-rings make my keyboard quieter?

They soften the sound of the key bottoming out, because the rubber ring cushions the landing. They do not silence the switch itself, so a clicky switch still clicks.

Can I take O-rings off again?

Yes. Pull the keycap off, slide the ring off the stem, and press the cap back on. The change is easy to undo, so you can try rings on a few keys first and remove them if you do not like the shorter travel.

Ranked keyboards guides