Keyboard Foam Types Explained
Keyboard foam is padding placed inside a keyboard case to soften the sound and feel of each keystroke. The common types are bottom foam, sandwich foam, switch pads, PET film, silicone and cotton padding, often stacked in layers. Gasket-mounted keyboards use several of these layers together for noise-dampening that removes hollow echoes.
What keyboard foam does
Foam sits between the parts of a keyboard to cushion each keystroke. The YUNZII B98 PRO lists a five-layer filling structure with internal noise-dampening, and the SOLAKAKA A99 Pro says its cotton pads remove internal cavity noise. Without foam, an empty case can ring with a hollow echo when you type. Foam changes sound and feel only; it does not change which switches or keycaps a keyboard uses.
Bottom foam and silicone
Bottom foam is a layer at the bottom of the keyboard case, and silicone is used the same way. The KiiBoom Phantom98 Lite lists bottom foam and bottom silicone among its damping materials. The AULA S99 describes a creamy silicone structure in its build. These layers cushion the parts above them and keep the case from ringing when keys bottom out.
Sandwich foam and switch pads
Sandwich foam sits between the plate and the circuit board, and a switch pad sits under the switches. The KiiBoom Phantom98 Lite lists latex sandwich foam, an IXPE switch pad and PET sound dampening film among its damping materials. The switch pad cushions each switch, the film adds a thin dampening layer, and the sandwich foam fills the gap between plate and board so the board does not sound hollow.
Cotton pads and five-layer stacks
Some keyboards stack several foam layers instead of using one. The SOLAKAKA A99 Pro uses five layers of cushioning pads, with noise-dampening cotton pads filled between the pads and the positioning plate. The YUNZII B98 PRO also uses a five-layer filling structure with internal noise-dampening and a multi-layer cushioning system. Stacked layers add more dampening material that removes cavity noise.
Gasket mount and foam together
Foam works with the way a keyboard is mounted. Three of the keyboards here use a gasket mount: the YUNZII B98 PRO, the SOLAKAKA A99 Pro and the KiiBoom Phantom98 Lite. The mount holds the plate on soft gaskets instead of screwing it down hard, and the foam layers fill the space around it. Together they give the soft, creamy feel and sound these keyboards describe.
What you need

AULA S99 Gaming Keyboard
A membrane keyboard with a creamy silicone structure, a 96% layout and RGB backlight.
View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue
A 96% mechanical keyboard with a gasket mount and five-layer filling structure, Milk V2 linear switches and hot swap.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A 96% mechanical keyboard with a gasket structure, five layers of cushioning pads, noise-dampening cotton pads and an LCD screen.
View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard
A 96% mechanical keyboard with a gasket mount and latex sandwich foam, an IXPE switch pad, PET film and bottom silicone.
View on AmazonThese come from our ranked list Best 96 Keyboard, which compares them spec by spec.
FAQ
Do I need foam in my keyboard?
No. Foam is an addition that softens sound and feel, and a keyboard works without it. Add it when you want noise-dampening and your keyboard lets you open the case to fit it.
Which foam layers do these keyboards use?
Bottom foam and bottom silicone sit at the bottom of the case, sandwich foam sits between the plate and the circuit board, and a switch pad sits under the switches. The KiiBoom Phantom98 Lite lists latex sandwich foam, an IXPE switch pad and PET film, and the SOLAKAKA A99 Pro uses five layers of cushioning pads with cotton pads.
Can I add foam to any keyboard?
Only when the keyboard opens and has room for the layers. Hot-swappable boards let you lift the switches out first, which makes fitting a switch pad simpler. Check the maker's manual for your model before you open it.




