How to Take Out a microSD Card
To take out a microSD card, eject it in software first, then press it in to release the spring and pull it straight out. On a phone, open the SIM tray with the eject tool and lift the card out of the tray.
Eject the card in software first
Removing a card while the device still writes to it can corrupt files, so eject it before you touch the slot. On a computer, eject the card from the file manager and wait until the card no longer appears in the file manager. On a phone, open Settings, find Storage, and tap Eject or Unmount next to the card. On a camera, turn the camera off, since the camera closes the card when it powers down. Wait until the device confirms the card is no longer in use.
Find the slot or the tray
Card slots sit in different places by device. A laptop often has a slot on the side, and the card may sit flush or stick out a little. A camera keeps the card behind a small door on the side or under the battery cover, and a phone keeps it in a tray on the edge that opens with the eject tool. An adapter turns a microSD card into a full-size SD card, so a card that came out of an adapter goes back into the adapter for the next use. Look at the shape of the slot before you push anything into it.
Press in to release a spring-loaded slot
Many laptop and camera slots hold the card with a spring. Press the edge of the card in with a fingertip until you feel a small click, then let go and the spring pushes the card out far enough to grip. Pull it straight out without bending it. If the card does not move, press it again and release it; another press often frees it. Never pull hard on a card that stays stuck, and never pry it out with a metal tool.
Open the tray on a phone
A phone holds the card in a tray on its edge. Push the eject tool, or a straightened paper clip, into the small hole beside the tray until the tray pops out a little, then pull the tray out with your fingers. Lift the card out of the tray and note which way it faced, so it goes back the same way. Push the empty tray back in until it sits flush. Keep the eject tool with the phone so it is there next time.
Hold the card by the edges and store it
Hold the card by its edges and keep your fingers off the gold contacts on the back. Slide it into its adapter, a card case, or the sleeve it came in, with the contacts facing in. Do not leave a bare card loose in a pocket or a bag, where it can bend or pick up dust. If the card will go into another device, put it in the adapter first so the larger slot reads it. Each card here comes with an adapter, so store the card in its adapter when it is out of a device.
What you need

SanDisk 256GB Extreme microSD Card + Adapter
A 256 GB card with a V30 speed rating, read speeds up to 245 MB/s, and an adapter in the box.
View on Amazon
SanDisk 128GB High Endurance Video microSDXC Card
A 128 GB card with a V30 speed rating and an adapter, made for dash cams and home monitoring systems.
View on Amazon
2 Pack TF Card
A two-pack of 128 GB cards with a C10 speed rating, each with an adapter.
View on Amazon
2 Pack Memory Card
A two-pack of 64 GB cards with a C10 speed rating, each with an adapter.
View on AmazonThese come from our ranked list Best Tf Card, which compares them spec by spec.
FAQ
Can I pull a microSD card out without ejecting it first?
You can, but the device may still be writing to the card, and files can end up damaged or unreadable. Eject or unmount the card first, or power the device off, then remove it.
Why does my microSD card not pop out when I press it?
The card may not be seated on the spring, or it may be held by a cover or a tray. Press it in again and let go, then check for a small door or a tray on the device. If it still will not move, power the device off and check the manual for the slot.
Do I need the adapter to use a microSD card in a laptop?
A laptop with a full-size SD slot reads a microSD card only through an adapter. Slide the card into the adapter with the contacts facing in, then slide the adapter into the slot.




