How to Take Apart Keyboard Stabilizers
To take apart keyboard stabilizers, first unplug the keyboard and remove the keycaps from the stabilized keys. Then pull the switches around each stabilizer so the stabilizer housings are free, unhook the wire from each housing, and lift the housings out of the plate or PCB. Keep each stabilizer's parts together so you can put them back in the same place.
Unplug the keyboard and remove the keycaps
Unplug the keyboard from the computer before you touch anything inside it. Use a keycap puller to lift the keycaps off the stabilized keys, such as the spacebar, Enter, Shift and Backspace, and pull each cap straight up so the stem does not bend. Set the caps aside in the order they came off the board, so each one goes back on the same switch.
Find how the stabilizers are held in place
Look at the housings on both ends of each stabilized key from the side of the keyboard. Some housings clip into the plate and lift out once the switches are gone, while others sit on the PCB and are held down by screws. Note which kind your keyboard has before you pull anything, since a clipped housing and a screwed housing come out in different ways.
Remove the switches around each stabilizer
A stabilizer sits between two switches, and those switches hold the housings in place. On a hot-swappable board, grip each switch with a switch puller and pull it straight up out of the plate. On a board with soldered switches, the switches must be desoldered first, so contact the maker or a repair shop if you do not have the tools and skill for that work.
Unhook the wire and lift out the housings
With the switches out, each stabilizer is a wire held by two housings. Press the bent end of the wire out of one housing, then out of the other, and lift the housings out of the plate or PCB. Keep the wire with the two housings it came from, since the wire length matches that key and a wire from another key may not fit.
Lay the parts out for reassembly
Put each stabilizer's wire and housings in its own small pile or bag, with a note of the key it came from. Note which way the wire faced and which housing sat on the left and which on the right before you put the parts away. Clean the housings and the wire while they are out, then put the parts back in the same order when you reassemble the keyboard.
What you need

AULA S99 Gaming Keyboard
A membrane keyboard with a 96% layout, a number pad, RGB backlighting and tri-mode Bluetooth 5.0, 2.4GHz and USB-C connections.
View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue
A 96% mechanical keyboard with hot-swappable Milk V2 linear switches, pre-lubed stabilizers, a gasket mount and QMK/VIA support.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A 96% mechanical keyboard with hot-swappable LEOBOG star vector switches, pre-lubricated stabilizers, a keycap puller and an LCD screen.
View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard
A 96% mechanical keyboard with hot-swappable Mochi switches, pre-lubricated stabilizers, a gasket mount and VIA support.
View on AmazonThese come from our ranked list Best 96 Keyboard, which compares them spec by spec.
FAQ
Can I remove stabilizers without taking out the switches?
No. The switches next to a stabilizer hold its housings in place, so the housings cannot lift out until those switches are gone. On a hot-swappable board you pull the switches out, and on a soldered board they must be desoldered first.
What tools do I need to take apart stabilizers?
A keycap puller for the keycaps and a switch puller for the switches on a hot-swappable board. You may also need a screwdriver if the stabilizers are held to the PCB by screws, and a small container to keep each stabilizer's parts together.
Can I put the stabilizers back after taking them apart?
Yes, if you kept each wire with its own housings and noted which way the wire faced. Put the housings back in the plate or PCB first, hook the wire into both housings, then press the switches back in and replace the keycaps.




