How to Set Up a Wireless Adapter for a PC
To set up a wireless adapter for a PC, plug the adapter into a USB 3.0 port, install its driver, then pick your Wi-Fi network and enter the password. The steps below cover choosing the adapter, installing it and getting online.
Check the USB port and operating system
Look for a free USB 3.0 port on the PC before buying, since the adapters shown below use USB 3.0. Then check the operating system each adapter supports: the NETGEAR A8500 works with Windows 11 only, the TP-Link Archer TX30U Plus and the WAVLINK adapter cover Windows 11 and 10 only, and the TP-Link Archer T3U Plus covers Windows 11, 10, 8.1, 8, 7 and XP. Match the adapter to the version of Windows on your PC, and check that your router's Wi-Fi standard lines up with the adapter, such as Wi-Fi 6 or Wi-Fi 7.
Plug in the adapter
Push the adapter firmly into the USB 3.0 port and leave it there while you install the driver. If the adapter has an adjustable antenna, angle it toward the router and keep it upright, since a folded antenna gives a weaker signal. On a desktop, use a port on the front or top of the case if the ports at the back sit against a wall, so the adapter has a clearer path to the router.
Install the driver
Plug the adapter in and wait for the Wi-Fi icon to appear in the taskbar, which means Windows has installed the driver. If no icon appears, open Device Manager, find the adapter, and install the driver from the maker's website. The TP-Link Archer TX30U Plus carries a preloaded driver, and the WAVLINK adapter includes built-in driver support for Windows 10 and 11.
Connect to the Wi-Fi network
Click the Wi-Fi icon in the taskbar, pick your network name from the list, and enter the network password. If your router shows two network names, one for 2.4 GHz and one for 5 GHz, pick 5 GHz when the PC sits near the router and 2.4 GHz when it sits farther away or behind walls. On a tri-band adapter with a Wi-Fi 7 router, the 6 GHz band is also there for a less crowded connection.
Check the signal and move the adapter
Open a web page or run a video call to see whether pages load and the call holds. If the signal is weak, move the adapter to another USB 3.0 port, turn the antenna toward the router, or move the PC closer to the router. If the connection drops again, restart the PC and the router, then connect to the network once more and check again.
What you need

TP-Link USB WPA3
A Wi-Fi 6 USB 3.0 adapter with dual-band AX1800 speeds, two high-gain antennas, WPA3 and a preloaded driver, for Windows 11 and 10 only.
View on Amazon
TP-Link USB AC1300
An AC1300 dual-band USB 3.0 adapter with a high-gain antenna and MU-MIMO, for Windows 11, 10, 8.1, 8, 7 and XP and macOS 10.9 to 10.15.
View on Amazon
NETGEAR Nighthawk USB
A Wi-Fi 7 tri-band USB 3.0 adapter with BE5000 speeds, a flip-up high-gain antenna and WPA3, for Windows 11 only.
View on Amazon
WAVLINK BE6500 USB
A Wi-Fi 7 tri-band USB 3.0 adapter with BE6500 speeds, two 3dBi antennas, WPA3 and built-in driver support, for Windows 11 and 10.
View on AmazonThese come from our ranked list Best USB Wireless Network Card, which compares them spec by spec.
FAQ
Do I need to install a driver for a USB Wi-Fi adapter?
Some adapters carry a preloaded or built-in driver and work as soon as you plug them in. If Windows does not recognize the adapter, install the driver from the maker's website.
Why does my adapter show two or three network names?
Dual-band adapters show the 2.4 GHz and 5 GHz bands, and tri-band adapters also show the 6 GHz band. Pick the band that fits where the PC sits.
Can I use a USB Wi-Fi adapter on a laptop that already has Wi-Fi?
Yes. Plug the adapter in, install the driver if Windows asks for it, and connect to your network through the adapter. Windows uses the adapter you connect with, so the built-in card stays idle while the adapter runs.


