How to Set Up a Newly Built PC
A newly built PC needs its parts checked, its cables connected and its operating system installed before it is ready to use. Shut the PC down and unplug it before you touch anything inside the case, then work through the checks in order. The steps below take you from first power-on to a finished desktop.
Check the parts before power
Open the case after shutting the PC down and unplugging it, and follow the manual for your motherboard and case. Check that the memory, graphics card and storage drive sit firmly in their slots, and that every power cable is pushed fully into its socket. Look for loose screws or cables touching a fan, and remove any packing foam left inside the case before you close it.
Connect the monitor and peripherals
Plug the monitor cable into the graphics card if your PC has one; on a PC with integrated graphics only, use the video port on the motherboard. Connect the keyboard, mouse and network cable, then plug the power cable into the wall and switch the power supply on. Press the power button and watch for the motherboard logo or a message asking you to enter setup.
Check the BIOS and boot order
Enter the BIOS or UEFI setup when the logo appears, using the key shown on the screen. Check that the BIOS sees the memory, the storage drive and the graphics card, and set the boot order so the USB drive or disc with your operating system comes first. Save the settings and restart the PC, then follow the installer prompts to set up the operating system.
Install drivers and updates
After the operating system is installed, install the drivers for the motherboard, graphics card and network adapter, starting with the ones from each maker's website. Run the operating system updates, then restart the PC and check that the display, sound and network all work. Install only the software you need, and check the requirements published for each app before you install it.
Check the PC under load
Open a demanding app or game you already own and watch for crashes, restarts or strange noises while it runs. Check that the fans spin and that air flows freely through the case, and keep the vents clear of dust and clutter. If the PC shuts down or restarts on its own, shut it down, unplug it and check the cables and seating before you contact the maker.
What you need

YAWYORE Gaming PC
A tower with an AMD Ryzen 7 5700X, a GeForce RTX 5060, 32GB of DDR4 RAM and a 1TB M.2 NVMe SSD.
View on Amazon
Dell Pro Desktop Tower
A tower with a 14th Gen Intel Core i3-14100, 8GB of DDR5 RAM, a 512GB SSD and Windows 11 Pro.
View on Amazon
OKAMUS Prebuilt PC
A tower with an i7 CPU up to 3.9GHz, 16GB of RAM, a 256GB M.2 SSD and four RGB fans.
View on Amazon
ZYNEEX Prebuilt Gaming Desktop PC
A tower with an AMD Ryzen 5 5500, a GeForce RTX 3050 6GB, 16GB of DDR4 RAM and a 1TB NVMe SSD.
View on AmazonThese come from our ranked list Best Desktop PC Computers, which compares them spec by spec.
FAQ
What do I do if the PC does not turn on?
Check that the power cable is plugged in and the switch on the power supply is on. Then shut the PC down, unplug it, and check that the power cables inside the case are pushed fully into their sockets.
Why does the monitor show no picture?
Check that the monitor cable is plugged into the right video port and that the monitor is set to the right input. If the picture is still blank, shut the PC down, unplug it, and push the monitor cable fully in and check that any graphics card sits firmly before you try again.
Do I need to install drivers after setup?
Yes. Install the drivers for the motherboard, graphics card and network adapter from each maker's website, then run the operating system updates. The PC works with basic drivers, but the maker drivers give you the full features of each part.




