Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Remove Mechanical Keyboard Keys

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To remove mechanical keyboard keys, unplug the keyboard, hook a keycap puller under a keycap and pull it straight up. Work across the board in rows, and leave the larger keys with stabilizers until you know how they lift. On a hot-swappable board you can then pull the switch out the same way, after you check the manual for your model.

  1. Unplug the keyboard and take a photo

    Switch the keyboard off or unplug it before you start, and disconnect the cable on a wired board. Take a clear photo of the full layout from above, so you can see where the keycaps go when you put them back. Set the keyboard on a flat surface with room to lay the keycaps out in order.

  2. Pull a keycap straight up with a puller

    Hook the arms of a keycap puller under opposite sides of a keycap, then pull straight up with steady pressure. Keep the puller level so the cap lifts off the switch stem without bending it. Put the cap aside in the same layout as the board, and move on to the next cap in the row.

  3. Lift the larger keys with care

    Spacebar, Enter and Shift keys sit on stabilizer bars under the caps, so they need a slower lift than a small key. Pull up gently from the middle of the cap and watch how the stabilizer moves as it comes free. If a cap resists, stop and reposition the puller instead of forcing it, since a bent stabilizer makes the key feel wrong when it goes back.

  4. Remove switches only on hot-swappable boards

    A keycap comes off any mechanical board, but a switch only comes out if the board is hot-swappable. The AULA F75 Pro keyboards, the Redragon K671 and the Aula WIN60 HE are hot-swappable, and the AULA F75 Pro base supports 3-pin or 5-pin switch replacement without soldering. Grip the switch with a switch puller, pull straight up, and check the manual for your model before you swap in a new switch.

  5. Put the keys back in place

    Line a keycap up over its switch stem, using your photo to check the layout, and press down until the cap seats with a firm click. For a larger key, seat the stabilizer, then press the cap down evenly from the middle. Reconnect the keyboard and press the keys to check that they sit level and register.

What you need

AULA F75 Pro Wireless Mechanical Keyboard

AULA F75 Pro Wireless Mechanical Keyboard

A 75% hot-swappable keyboard with LEOBOG reaper switches, side-printed PBT keycaps and a knob, with Bluetooth 5.0, 2.4GHz wireless and USB wired connection.

View on Amazon
AULA F75 Pro Wireless Mechanical Keyboard

AULA F75 Pro Wireless Mechanical Keyboard

A 75% hot-swappable keyboard with LEOBOG star vector switches, side-printed PBT keycaps and RGB backlight, with Bluetooth 5.0, 2.4GHz wireless and USB wired connection.

View on Amazon
Redragon Mechanical Gaming Keyboard Wired

Redragon Mechanical Gaming Keyboard Wired

A wired keyboard with a hot-swappable linear red switch, 11 programmable backlit modes, double-shot PBT keycaps and 4 spare switches.

View on Amazon
Aula WIN60 HE

Aula WIN60 HE

A 60% wired keyboard with Hall Effect magnetic switches, hot-swappable design, adjustable actuation and rapid trigger mode.

View on Amazon

These come from our ranked list Best Mechanical Keyboard, which compares them spec by spec.

FAQ

Can I remove keys from any mechanical keyboard?

Keycaps come off most mechanical boards with a puller, pulled straight up. Switches only come out on a hot-swappable board, so check the manual for your model before you try to pull a switch.

Do I need a keycap puller?

A puller is the right tool for the job, since it hooks under opposite sides of the cap and lifts it straight up. Pulling with fingers or a flat tool can bend the stem or scratch the cap.

How do I put the keys back?

Line a cap up over its switch stem, press it down until it seats, and use your photo to check the layout. For larger keys, seat the stabilizer, then press the cap down evenly.

Ranked keyboards guides