How to Mount a Camera on a Monitor
You mount a camera on a monitor by resting it on the top edge of the screen with the lens pointed at your face, then plugging it into the computer with its USB cable. The camera sits above the screen, so it looks at you while you look at the display. Open your video app, check the preview, and adjust the tilt until your face is centered.
Rest the camera on the monitor
Set the camera on the top edge of the monitor so the lens faces you and the base rests flat. Push it back until it sits steady and does not wobble when you type. If the camera slides on a thin screen edge, hold it in place while you adjust the angle. The lens should sit near the center of the screen width so your face stays in the middle of the frame.
Plug the camera into the computer
Connect the camera to the computer with its USB cable, using a USB-C port where the camera lists one, and a USB port for a camera with a USB plug. Wait for the computer to recognize the camera before you open a video app. If the camera does not appear, try another port and check that the cable is pushed in all the way. Keep the cable slack so it does not pull the camera off the monitor.
Aim the lens and check the preview
Open your video app and look at the preview to see what the camera sees. Tilt the camera down until your eyes sit near the top of the frame, and move the monitor or your chair so your head is centered. Turn on a light in front of you rather than behind you, so your face is lit and the window behind you does not wash out the picture. Leave the camera still once the framing looks right.
Pick the camera in your video app
Open the video settings in your app and pick the camera you mounted from the camera list. If the app shows the wrong camera, close the other video apps that may hold it, then pick it again. Pick the camera microphone too when you want the app to use it, and run a short call to check that the picture and sound come through. Change the camera choice back if you move the camera to another computer.
What you need

OBSBOT Meet SE 100FPS Webcam for PC
A 1080P webcam with USB-C connection, AI framing and gesture control for video calls and streaming.
View on Amazon
OBSBOT Meet 2-4K Webcam for PC
A 4K webcam with autofocus, dual microphones and gesture control, with a USB-C connection.
View on Amazon
Elgato Facecam 4K
A 4K webcam over USB-C, with a Sony STARVIS 2 sensor, HDR support and 49mm lens filter support.
View on Amazon
Logitech C920x HD Pro PC Webcam
A 1080p webcam with autofocus, stereo microphones and HD light correction over USB.
View on AmazonThese come from our ranked list Best Webcam, which compares them spec by spec.
FAQ
Can I mount a camera on a curved monitor?
Yes, if the camera rests steady on the top edge. A curved screen still has a top edge to rest the camera on, but a thin or sharply sloped edge can make it slide, so hold it in place and check that it stays put before a call.
Why does my camera point at the ceiling?
The camera is tilted up because it sits high on the monitor or leans back. Tilt it down until your eyes sit near the top of the preview, and lower the monitor or raise your chair so the lens meets your face straight on.
Do I need a separate mount for a webcam?
No. A webcam can rest on the top edge of the monitor as it is, and you only need a separate mount when the camera will not sit steady there.


