How to Attach a Webcam to a Monitor
Clip the webcam onto the top edge of your monitor, plug its USB cable into your computer, and pick the camera in your video app. Most webcams sit on the monitor with a built-in clip or mount, so no tools are needed. The steps below cover placement, connection and the settings to check.
Place the webcam on the monitor
Set the webcam on the top center edge of the monitor, with the lens facing you. A centered position keeps you in the middle of the frame and puts the camera near eye level, which looks natural on a call. If the clip feels loose, press it firmly against the monitor bezel and check that the webcam sits level instead of tilting down. On a thin monitor, place the webcam on a small tripod or stand behind the desk instead of forcing the clip.
Plug the webcam into your computer
Plug the webcam cable into a free USB port on your computer. The OBSBOT and Elgato webcams below use USB-C, while the Logitech C920x uses USB, so check which port your computer has free before you plug in. Wait a few seconds for the computer to find the camera. If nothing appears, try another USB port and check that the cable is seated fully at both ends.
Pick the camera in your video app
Open your video app and open its camera settings. Pick the webcam you just plugged in from the camera list, since the app may still point at the built-in camera. Start a preview call and check that your picture shows up. If the picture stays black, close other apps that may hold the camera, then pick the webcam again.
Frame the shot and set the focus
Sit so your eyes are near the top third of the frame and the camera is close to eye level. Move closer or farther from the monitor until your head and shoulders fill the frame without cutting off the top of your head. Tilt the webcam down slightly if the ceiling fills the picture. Check the background behind you for clutter or bright windows, and move a lamp in front of you if your face looks dark.
Check the microphone and lighting
Check the microphone in the same app settings where you picked the camera. Speak at your normal volume and watch the level meter move. The OBSBOT Meet 2 and the Logitech C920x have built-in microphones, so you may not need a separate mic. If your voice sounds faint, move closer to the webcam or raise the mic level in the app. Close the door and mute notifications before a call so background noise stays out.
What you need

OBSBOT Meet SE 100FPS Webcam for PC
A 1080P webcam over USB-C, with AI framing, gesture control, staggered HDR and a 1/2.8-inch sensor.
View on Amazon
OBSBOT Meet 2-4K Webcam for PC
A 4K webcam over USB-C, with AI framing, autofocus, dual microphones, HDR and gesture control.
View on Amazon
Elgato Facecam 4K
A 4K webcam over USB-C, with a Sony STARVIS 2 sensor, HDR, 49mm lens filter support and Camera Hub software.
View on Amazon
Logitech C920x HD Pro PC Webcam
A 1080p webcam over USB, with autofocus, dual microphones, HD light correction and a 3-month XSplit VCam license.
View on AmazonThese come from our ranked list Best Webcam, which compares them spec by spec.
FAQ
Do I need software to install a webcam?
No. The OBSBOT, Elgato and Logitech webcams here connect over USB and are ready once plugged in. The OBSBOT Center software and Elgato Camera Hub add extra settings, but the camera works in your video app without them.
Can I use a webcam with a laptop and a monitor?
Yes. Plug the webcam into the laptop, place it on the monitor, and pick it in your video app. The camera stays with the laptop when you unplug the monitor, so you only set it up once per computer.
Why does my video app still show the built-in camera?
The app keeps its last camera choice. Open the camera settings in the app, pick the webcam you plugged in, and start a preview to check the picture. If the webcam does not appear in the list, try another USB port and check the cable.



