How to Install a USB Wi-Fi Adapter
Plug the adapter into a USB port, install the driver if the adapter needs one, then pick your Wi-Fi network from the network list and enter the password. The NETGEAR Nighthawk A7500 and A8000 set up with plug and play, while the TP-Link Archer T2U Plus needs the driver from the TP-Link Download Center.
Plug the adapter into a USB port
Push the adapter into a free USB port on the computer and leave it there while you set it up. The NETGEAR Nighthawk A7500 and A8000 plug into a USB 3.0 port for up to 10x the data speed of USB 2.0, per the maker. Give the antenna models room to move, since the antenna needs to point at the router in a later step.
Install the driver when the adapter needs one
Some adapters set themselves up when plugged in, and others need a driver first. The NETGEAR Nighthawk A7500 and A8000 set up with plug and play. The TP-Link Archer T2U Plus needs the driver from the Download Center on the TP-Link site, and the TP-Link Archer T3U Plus has a friendly user interface for a simple installation. Follow the prompts on screen until the adapter shows in the network list.
Point the antenna at the router
Rotate the antenna so it faces the router. The TP-Link Archer T2U Plus and Archer T3U Plus have an adjustable, multi-directional antenna, and the NETGEAR Nighthawk A7500 and A8000 have a flippable, high-gain external antenna. The NETGEAR Nighthawk A8000 also includes a compact cradle to adjust for peak reception.
Connect to your Wi-Fi network
Open the Wi-Fi list on the computer, pick your network name and enter the password. The adapters here work on the 2.4 GHz and 5 GHz bands, and the NETGEAR Nighthawk A8000 also uses the 6 GHz band, which requires a WiFi 6E router. The TP-Link Archer T2U Plus supports WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK security, and the NETGEAR Nighthawk A7500 and A8000 use WPA3 security on every connection.
Check that the connection works
Open a web page to confirm the computer reaches the internet through the adapter. If the network name does not appear, check that the driver is installed, the adapter sits in the port and the antenna points at the router. If the computer still shows no networks, unplug the adapter, plug it back in and run through the steps again.
What you need

TP-Link AC600 USB
An AC600 dual-band adapter with a 5dBi high-gain antenna, 2.4 GHz and 5 GHz bands and Windows-only support, with a 2 year manufacturer warranty.
View on Amazon
TP-Link USB
An AC1300 dual-band adapter with a 5 dBi high-gain antenna, MU-MIMO and a USB 3.0 interface, for Windows 11/10/8.1/8/7/XP and macOS 10.9-10.15.
View on Amazon
NETGEAR Nighthawk USB A7500
A WiFi 6 adapter with AX1800 dual-band speeds up to 1.8 Gbps, a flippable high-gain external antenna and a USB 3.0 interface for Windows 10 and 11.
View on Amazon
NETGEAR Nighthawk USB A8000
A WiFi 6E adapter with AXE3000 tri-band speeds up to 3 Gbps on 2.4, 5 and 6 GHz, a flippable high-gain external antenna and a compact cradle.
View on AmazonThese come from our ranked list Best USB Wi-Fi Adapter, which compares them spec by spec.
FAQ
Do I need a driver for a USB Wi-Fi adapter?
It depends on the adapter. The NETGEAR Nighthawk A7500 and A8000 set up with plug and play, while the TP-Link Archer T2U Plus needs the driver from the TP-Link Download Center.
Which USB port should I use for the adapter?
Use a USB 3.0 port for the adapters that have one. The NETGEAR Nighthawk A7500 and A8000 plug into a USB 3.0 port for up to 10x the data speed of USB 2.0.
Will a USB Wi-Fi adapter work on a Mac?
The TP-Link Archer T3U Plus supports macOS 10.9-10.15 as well as Windows 11/10/8.1/8/7/XP. The TP-Link Archer T2U Plus lists Windows versions only, and the NETGEAR Nighthawk A7500 and A8000 list Windows 10 and 11, so check the version your computer runs before you buy.



