Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Install an Under-Desk Keyboard Tray

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Mount the tray rails under the desk with the screws from the tray kit, slide the tray into the rails, and set the keyboard on the tray. Mark the screw holes first so the rails sit square and the tray slides in and out freely. Check the tray fits the keyboard before you start, since a 96% keyboard with a number pad needs a wide tray.

  1. Check the tray and the desk

    Set the tray under the desk and check it fits between the desk legs and clears any drawers or crossbars. Set the keyboard on the tray and check it sits flat with room to slide. Read the tray's instructions and lay out the rails, screws and any brackets from the kit before you pick up a tool.

  2. Mark the screw holes

    Hold the rails in place under the desk and mark each screw hole with a pencil. Check the marks line up on both sides so the rails sit parallel and the tray runs straight. Move the rails if a mark lands on a desk edge, a drawer runner or a cable hole, then mark the new spot.

  3. Fix the rails under the desk

    Drive the screws from the kit through the rail holes into the marks, starting with one screw per rail so you can still shift it. Check the rail sits flat against the desk and square to the front edge, then drive the rest of the screws. Tighten each screw until the rail sits firm, and stop before the screw strips the desk.

  4. Fit the tray and check the slide

    Slide the tray into the rails and push it in and out a few times. It should run free without catching or dropping at the front. If it sticks, loosen the screws on one rail, shift the rail until the tray runs free, and tighten the screws again. Check any lock or stop on the tray holds it when pushed in.

  5. Set the keyboard on the tray

    Set the keyboard on the tray and check it sits flat and does not slide off the front edge. Connect the keyboard with the cable or the wireless receiver, and check the keys work from your normal sitting spot. If the keyboard slides, check the tray's instructions for a mat or stop that holds it in place.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A 96% membrane keyboard with 99 keys, a number pad, RGB backlight and Bluetooth, 2.4GHz and USB-C connections for the tray.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A 96% wireless mechanical keyboard with a number pad, hot-swappable Milk switches, RGB backlight and tri-mode Bluetooth, 2.4GHz and USB-C.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A 96% hot-swappable mechanical keyboard with 97 keys, an LCD screen, a metal knob, RGB backlight and BT 5.0, 2.4GHz and USB-C.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A 96% wireless mechanical keyboard with 97 keys, hot-swappable Mochi switches, RGB backlight and tri-mode BT 5.0, 2.4GHz and USB-C.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Will my keyboard fit on the tray?

Check the tray width against the keyboard before you buy or fit it. The keyboards here use a 96% layout with a number pad, so they need a tray wide enough for the full keyboard and its cable or receiver.

Can I use a wireless keyboard on a tray?

Yes. The keyboards here connect over Bluetooth, 2.4GHz or USB-C, so pick the connection your computer supports. Keep the wireless receiver clear of the desk frame so the signal is not blocked.

What if the tray does not slide smoothly?

Check the rails sit parallel and level, and that no screw head catches the tray. Loosen the screws on one rail, shift it until the tray runs free, and tighten the screws again.

Ranked keyboards guides