How to Install O-Rings on a Keyboard
O-rings slide onto the stems of the keycaps and sit between each keycap and its switch, so the key stops short of bottoming out and types more quietly. Pull a keycap off, push one ring down the stem until it rests flat under the keycap, then press the keycap back onto the switch. This works on keyboards with removable keycaps, so check your keyboard, since not every keyboard takes them.
Check the keycaps come off
O-rings only fit keyboards with removable keycaps, so pull one keycap first to see how it is held. The hot-swappable keyboards in the list below let you pull switches and keycaps without soldering, while the membrane keyboard in the list does not support hot-swapping. If a keycap will not lift off with a puller, stop and leave it in place rather than forcing it.
Pull the keycaps off
Unplug the keyboard or switch it off, then work across one row at a time so the keycaps stay in order. Hook a keycap puller under two sides of a keycap and pull straight up. Set each keycap upside down in a row on the desk, so you can see the stems and put every key back in its own place.
Slide an O-ring onto each stem
Hold a keycap upside down and push one O-ring over the stem, sliding it down until it rests flat against the underside of the keycap. Use one ring per keycap, and check that the ring sits level rather than tilted or caught halfway down the stem. A tilted ring can make the key sit crooked or rub when you press it.
Press the keycaps back on
Line each keycap stem up over its switch and press straight down until the keycap seats. Work through the keyboard in the same order you removed the caps, and press each key a few times as you go. If a key feels stuck or sits higher than its neighbors, pull it off and refit the ring before moving on.
Check the sound and feel
Type a few lines and listen for keys that still clack hard or feel different from the rest. A key that bottoms out loudly may have a ring that slipped, so pull that cap and check the ring. When every key sounds even and presses smoothly, the rings are seated and the job is done.
What you need

AULA S99 Gaming Keyboard
A 99-key membrane keyboard with RGB backlight and Bluetooth, 2.4GHz and USB-C connection. It does not support hot-swapping, so check the keycap fit before fitting O-rings.
View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue
A 96% hot-swappable mechanical keyboard with pre-lubed switches, a gasket mount and a number pad, so keycaps pull off for fitting O-rings.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A 96% hot-swappable mechanical keyboard with a keycap puller in the box, a gasket structure and an LCD screen for checking the connection.
View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard
A 96% hot-swappable mechanical keyboard with a gasket mount, RGB backlight and 8000mAh battery, with keycaps that pull off for O-rings.
View on AmazonThese come from our ranked list Best 96 Keyboard, which compares them spec by spec.
FAQ
Do O-rings work on any keyboard?
No. They fit keyboards with removable keycaps that have stems the rings can slide onto, so check that your keycaps pull off before buying a set.
Do O-rings change how the keys feel?
Yes, a little. The ring cushions the key at the bottom of the press, so the landing feels softer and sounds quieter. The keys still travel and register the same way, since the ring only shortens the last part of the travel.
Can I remove O-rings later?
Yes. Pull the keycaps off, slide the rings off the stems, and press the keycaps back on. Nothing about the keyboard changes, so you can go back to the original feel at any time.




