Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Install Keyboard Switches

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To install keyboard switches, unplug the keyboard, pull the old switches straight up out of their sockets, and press the new switches straight down until they sit flat. This works on hot-swappable keyboards: the YUNZII, SOLAKAKA and KiiBoom keyboards here are hot-swappable, while the AULA S99 is a membrane keyboard that does not support hot-swapping.

  1. Check that your keyboard is hot-swappable

    The YUNZII, SOLAKAKA and KiiBoom keyboards are hot-swappable, so their switches pull out without soldering. The AULA S99 is a membrane keyboard that does not support hot-swapping, so its switches cannot be swapped this way. Unplug the keyboard before you start, and follow the manual for your model.

  2. Pull the old switches out

    Take the keycaps off with a keycap puller. The SOLAKAKA comes with a keycap puller. Grip each switch and pull it straight up out of the socket, and set the old switches aside in order. Check that the pins on the new switches are straight before you fit them.

  3. Line up the pins and press the switch in

    Match the pins to the socket: the YUNZII takes 3-pin and 5-pin switches, and the SOLAKAKA supports 3/5-pin. Line the pins up with the holes, press the switch straight down until it sits flat, and check that it does not wobble. Do not force a switch with bent pins; straighten the pins or use another switch.

  4. Put the keycaps back and press each key

    Put the keycaps back on the new switches and plug the keyboard back in. Press each key and check that it registers and feels even across the board. If a key does not register, pull the switch out and check the pins again. Follow the manual for your model if a key still does not work.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A 96% membrane keyboard with a number pad, RGB backlight and tri-mode Bluetooth, 2.4GHz and USB-C connections, which does not support hot-swapping.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A 96% hot-swappable mechanical keyboard with pre-lubed Milk V2 linear switches, a gasket mount and tri-mode Bluetooth, 2.4GHz and USB-C connections.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A 96% full hot-swappable keyboard with LEOBOG star vector switches, a keycap puller, an LCD screen and a metal knob.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A 96% hot-swappable keyboard with Mochi switches, a gasket mount, an 8000mAh battery and three connection modes.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Do I need to solder keyboard switches?

No, not on a hot-swappable keyboard. The YUNZII, SOLAKAKA and KiiBoom keyboards swap switches without soldering. The AULA S99 is a membrane keyboard that does not support hot-swapping.

What switches fit the YUNZII B98 PRO?

The YUNZII base takes 3-pin and 5-pin switches. Line the pins up with the socket and press the switch straight down until it sits flat.

Can I install switches on the AULA S99?

No. The AULA S99 is a membrane keyboard that does not support hot-swapping, so its switches are not made to pull out and swap. Follow the manual for your model instead of opening it.

Ranked keyboards guides