How to Clean an RGB Keyboard
To clean an RGB keyboard, unplug it first, turn the lighting off, and shake out the loose crumbs. Brush between the keys, wipe the keycaps with a slightly damp cloth, and let the board dry fully before you plug it back in. The boards below all have RGB backlighting, and the steps differ a little by switch type and whether the keycaps come off.
Unplug and switch off
Unplug the keyboard before you clean it. The Redragon S101-3 PRO, the Logitech G213, and the MageGee K1 are wired, so pull the USB cable from the computer. The Redragon S101M-KS runs wired, Bluetooth, or on a 2.4G receiver, so switch it off and pull the receiver too. Turn the RGB lighting off so you can see the dirt and so no key press wakes the board while you work.
Shake out the loose debris
Turn the keyboard upside down over a bin and tap the back to drop crumbs and dust. The Logitech G213 is built to repel liquids, crumbs, and dirt, but the debris still has to come out before you wipe. Work the board in short shakes rather than one hard bang, and check the gaps between the keys for anything still stuck.
Clean between the keys
Use a soft brush or compressed air to clear the gaps between the keys, working from one side of the board to the other. On the MageGee K1, the floating keycaps are removable, so you can pull them off and clean underneath. On the membrane Redragon S101-3 PRO, brush and wipe the keys in place instead of pulling.
Wipe the keycaps and frame
Dampen a microfiber cloth with water and wipe the keycaps and the frame, then wipe again with a dry cloth. Never spray liquid straight onto the board, and never soak it. The Redragon S101M-KS has splash resistance and the Logitech G213 repels liquids, but neither is made to be washed, so keep water out of the switches and the USB port.
Dry it before you reconnect
Let the keyboard dry fully before you plug it back in or switch it on. Leave it upside down for a while so any dampness drains out of the key gaps, and check that the keys feel dry to the touch. Once it is dry, reconnect the cable or receiver, switch the RGB lighting back on, and press a few keys to check that they all register.
What you need

Redragon S101-3 PRO Gaming Keyboard and Mouse
A wired full-size membrane RGB keyboard and mouse combo at 2.16 lb, with 6 backlight modes and a wrist rest.
View on Amazon
Redragon S101M-KS Gaming Keyboard and Mouse Wireless
A wireless tri-mode RGB keyboard and mouse with 8 backlight patterns, splash resistance, and a 6-foot detachable USB-C cable.
View on Amazon
Logitech G213 Prodigy Gaming Keyboard
A wired full-sized Mech-Dome RGB keyboard at 2.2 lb, with 5 lighting zones, a palm rest, and a 2-year warranty.
View on Amazon
Gaming Keyboard and Mouse Combo
A wired full-size RGB keyboard with 104 keys at 2.2 lb, with removable floating keycaps and 8 light colors.
View on AmazonThese come from our ranked list Best RGB Keyboard, which compares them spec by spec.
FAQ
Can I remove the keycaps to clean an RGB keyboard?
On the MageGee K1, yes: the floating keycaps are removable, so pull them off and clean underneath. The Redragon S101-3 PRO is a membrane keyboard, so brush and wipe its keys in place.
Can I use water to clean an RGB keyboard?
Only on a damp cloth. Wipe the keycaps and frame with a slightly damp microfiber cloth, then dry them. Never spray liquid onto the board or soak it, even though the Redragon S101M-KS has splash resistance and the Logitech G213 repels liquids.
How do I clean under the keys without removing them?
Turn the keyboard upside down and tap out the loose debris, then work a soft brush or compressed air through the gaps from one side to the other. Finish with a wipe of the keycaps and let the board dry before reconnecting it.




