How to Clean a Monitor and Keyboard
Turn off the monitor and keyboard, unplug them, and let the screen cool before you clean them. Dust comes off first with a dry, soft cloth, then a lightly damp cloth lifts marks from the screen and keys. Work with light pressure, keep liquid away from ports and edges, and let both dry before you plug them back in.
Shut down and unplug first
Shut down the computer, turn off the monitor, and unplug the monitor and the keyboard from power and from the computer. If the keyboard is wireless, turn it off or remove its connection so a key press does not wake the computer while you clean. Follow the manual that came with your monitor and keyboard for cleaning and for any part you plan to remove. This keeps the screen dark so dust and marks show, and it keeps liquid and pressure away from a live device.
Remove loose dust first
Wipe the screen and the keyboard with a dry, soft, lint-free cloth to lift dust before you use any damp cloth. Brush dust from between keys with a soft brush, and tip the keyboard upside down over a bin so loose crumbs fall out. Do not shake the keyboard hard, and do not use a vacuum nozzle pressed against the screen or keys. Dust left on the screen can scratch it when you wipe, so take this step before you dampen the cloth.
Clean the monitor screen
Dampen a soft, lint-free cloth with a small amount of water, and wipe the screen in slow, straight lines with light pressure. Do not spray water or cleaner straight onto the screen, and do not let liquid run down to the lower edge or into the frame. For a mark that stays, wipe the same spot again with the damp cloth, then dry it with another dry cloth. Leave the screen to dry fully before you turn the monitor back on.
Clean the keys and gaps
Wipe the tops of the keys with the damp cloth, then dry them with a dry cloth so no water sits between keys. Clean the gaps with a soft brush or a dry cloth folded to a point, and work across the keyboard so dust moves out instead of deeper in. If your keyboard came with a keycap puller, follow its manual to remove keycaps, clean under them, and press each keycap back into place. Only pull keycaps from a keyboard that came with a keycap puller.
Let everything dry, then reconnect
Leave the monitor and keyboard to dry fully, with the screen and keys open to the air, before you plug anything back in. Check that no damp spots remain on the screen, between keys, or near ports and cable ends. Plug the monitor and keyboard back in, turn the monitor on, and press a few keys to check that the keyboard responds. If a key sticks or the screen shows a mark, clean that spot again with a dry cloth and let it dry before you use it.
What you need

AULA S99 Gaming Keyboard
A 96% membrane keyboard with a number pad and RGB backlight, which you can disconnect by Bluetooth, 2.4GHz or USB-C before cleaning.
View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue
A 96% wireless mechanical keyboard with hot-swappable switches and keycaps that swap without soldering, plus RGB backlight and a number pad.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A 96% wireless mechanical keyboard with hot-swappable switches, a keycap puller, an LCD screen and a metal knob for settings.
View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard
A 96% wireless mechanical keyboard with hot-swappable switches, RGB backlight and VIA support for remapping keys and lighting.
View on AmazonThese come from our ranked list Best 96 Keyboard, which compares them spec by spec.
FAQ
Can I spray cleaner directly on the screen?
No. Spray water onto a soft cloth instead, and wipe the screen with the damp cloth. Spraying the screen can let liquid run into the frame and ports, where it can damage the monitor.
How do I clean between the keys?
Brush dust out with a soft brush, then wipe the gaps with a dry cloth. Tip the keyboard upside down over a bin to let loose crumbs fall out. If your keyboard came with a keycap puller, follow its manual to remove keycaps and clean under them.
Should I clean the monitor while it is on?
No. Turn the monitor off and unplug it first, so dust and marks show on a dark screen and you do not press on a live display. Let the screen dry fully before you turn it back on.
What if a key sticks after cleaning?
Leave the keyboard unplugged and let it dry fully, then press the key a few times to check it. If it still sticks, clean around it with a dry cloth and a soft brush. If it does not free up, follow the manual that came with your keyboard or contact its maker.




