How to Clean Mechanical Keyboard Switches
To clean mechanical keyboard switches, unplug the keyboard, pull the keycaps, brush and blow the dust out, and pull the switches to clean under them on a hot-swappable board. All four keyboards here are hot-swappable, so the switches pull out without soldering. Work with dry tools, let parts dry fully, and follow the maker's manual.
Unplug the keyboard first
Switch the keyboard off and unplug it before you touch the keycaps or switches. On a wireless board, turn it off and unplug the cable too. Take a photo of the layout so each keycap goes back on the right switch. Work on a clear desk with the keycaps and switches where you can see them, and keep drinks away from the board.
Pull the keycaps off
Hook a keycap puller under each keycap and pull straight up, working across the board one row at a time. Set the keycaps aside in layout order so they go back on the right switches. With the caps off, brush the dust from the plate with a soft brush. Do not pry the caps off with a screwdriver or a knife, which can mark the caps or the plate.
Brush and blow out the dust
Brush the dust and crumbs from around each switch with a soft brush, then blow the rest out with short bursts of compressed air. Wipe the plate with a dry, soft cloth, and wipe the keycaps the same way. If you wipe with a damp cloth, let the board dry fully before the caps go back on, and follow the maker's manual if it names a cleaner for your board.
Pull the switches to clean under them
All four keyboards here are hot-swappable, so the switches pull straight out without soldering. Hook a switch puller under the switch and pull it straight up, then brush the dust from the socket and the plate. The AULA F75 Pro boards take 3-pin or 5-pin switches. Push the switch back in until it sits flat, and check that it presses cleanly before you refit the keycap.
Refit the caps and check every key
Press each keycap back onto its switch until it sits flat, using your photo of the layout to check the order. Plug the keyboard in and press every key to check that each one registers. If a key still sticks or does not register, pull its switch, clean the socket again, and refit it. If it still does not work, contact the maker.
What you need

AULA F75 Pro Wireless Mechanical Keyboard
A 75% hot-swappable keyboard with LEOBOG reaper switches, pre-lubed stabilizers, side-printed PBT keycaps and a control knob.
View on Amazon
AULA F75 Pro Wireless Mechanical Keyboard
A 75% hot-swappable keyboard with LEOBOG star vector switches, pre-lubed stabilizers, side-printed PBT keycaps and a control knob.
View on Amazon
Redragon Mechanical Gaming Keyboard Wired
A wired hot-swappable keyboard with linear red switches, 11 backlit modes, 4 spare switches and anti-ghosting.
View on Amazon
Aula WIN60 HE
A 60% wired hot-swappable keyboard with Hall Effect magnetic switches, rapid trigger mode and 8000 Hz polling.
View on AmazonThese come from our ranked list Best Mechanical Keyboard, which compares them spec by spec.
FAQ
Can I remove the switches to clean them?
Yes, on a hot-swappable board. All four keyboards here are hot-swappable, so the switches pull out without soldering. Pull the switch straight up, brush the socket, and push the switch back in until it sits flat.
Can I wash the keycaps with water?
Only if the maker's manual says so for your board. Otherwise wipe the keycaps with a dry, soft cloth and let them dry fully before you refit them. Never put a wet keycap back on a switch.
What if a key still does not work after cleaning?
Pull the switch out, clean the socket again, and refit the switch until it sits flat. If the key still does not work, contact the maker. The Redragon comes with 4 spare switches, and its warranty runs 24 months.




