Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean Mechanical Keyboard Keys

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To clean mechanical keyboard keys, unplug the keyboard, remove the keycaps with a keycap puller, and wash the caps in warm soapy water. Shake the loose dust and crumbs out of the board, brush between the switches, and wipe the plate with a damp cloth. Let the caps dry fully before you press them back onto the switches.

  1. Unplug the keyboard and take a photo

    Disconnect the keyboard from the computer before you touch the keys, so no stray keypress wakes the screen or types into an open document. Take a photo of the layout from above, so you can put every cap back in the right place. Work on a clear table with a small bowl nearby to hold the caps. If your keyboard is wireless, switch it off as well.

  2. Remove the keycaps

    Hook a keycap puller under one cap at a time and pull straight up with a steady lift. Work row by row from the top, and set the caps in the bowl as you go. If a cap resists, wiggle it gently instead of forcing it, since a hard pull can bend a switch stem. Keep the switches on the board and leave them alone for now.

  3. Wash the keycaps in soapy water

    Fill a bowl with warm water and a small drop of dish soap, then drop the caps in and stir them by hand. Leave them to soak while you clean the board, then rub each cap between your fingers to lift the grime from the sides. Rinse them in clean water and spread them on a towel to dry. Wait until the caps feel dry inside and out before you refit them.

  4. Clean the board and refit the caps

    Turn the board upside down and tap it gently over a bin to drop out the crumbs and dust. Brush between the switches with a soft brush, then wipe the plate with a cloth dampened with water and wrung out well. Never pour water on the board and never spray cleaner into the switches. Match each cap to your photo, press it down until it seats, and plug the keyboard back in.

What you need

AULA F75 Pro Wireless Mechanical Keyboard

AULA F75 Pro Wireless Mechanical Keyboard

A 75% keyboard with side-printed PBT keycaps and LEOBOG reaper switches, with a hot-swappable base that supports 3-pin or 5-pin switch replacement.

View on Amazon
AULA F75 Pro Wireless Mechanical Keyboard

AULA F75 Pro Wireless Mechanical Keyboard

A 75% hot-swappable keyboard with side-printed PBT keycaps in gradient blue and LEOBOG star vector switches, with tri-mode Bluetooth, 2.4GHz and USB wired connection.

View on Amazon
Redragon Mechanical Gaming Keyboard Wired

Redragon Mechanical Gaming Keyboard Wired

A wired keyboard with hot-swappable linear red switches and double-shot PBT keycaps, with 11 backlit modes and 12 multimedia key shortcuts.

View on Amazon
Aula WIN60 HE

Aula WIN60 HE

A compact 60% wired keyboard with hot-swappable magnetic switches and RGB lighting, with adjustable actuation and rapid trigger mode for gaming.

View on Amazon

These come from our ranked list Best Mechanical Keyboard, which compares them spec by spec.

FAQ

How often should I clean my keyboard keys?

Clean the caps when they feel sticky or look grimy, and brush the dust out whenever crumbs collect between the switches. A quick shake and brush keeps the board tidy between full washes.

Can I wash mechanical keycaps in water?

Yes, if you remove them from the board first. Wash them in warm soapy water, rinse them well, and let them dry fully before you press them back on, so no moisture reaches the switches.

Can I clean the switches without removing the keycaps?

You can brush loose dust from the surface, but grime under the caps stays out of reach. Remove the caps for a real clean, then brush and wipe the plate while the caps soak.

Ranked keyboards guides