Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean Keyboard Switches After a Spill

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To clean keyboard switches after a spill, switch the keyboard off and unplug it, then turn it upside down so the liquid drains out. Remove the keycaps, wipe the switches and the plate with a damp cloth, and let the board dry fully before you plug it back in. If keys still stick or miss presses after drying, contact the maker.

  1. Switch it off and unplug it

    Switch the keyboard off and unplug it from the computer as soon as liquid spills on it, so no more power runs through the board. Turn the keyboard upside down over a towel and let the liquid drain out. Do not press the keys while the board is wet, and do not plug it back in to check whether it still works.

  2. Remove the keycaps

    Hook a keycap puller under one cap at a time and pull straight up with a steady lift. Work row by row from the top, and set the caps in a bowl as you go. If a cap resists, wiggle it gently instead of forcing it, since a hard pull can bend a switch stem. Keep the switches on the board unless your keyboard is hot-swappable and the manual allows switch removal.

  3. Wipe the switches and the plate

    Wipe the switches and the plate with a cloth dampened with water and wrung out well, working around the sticky keys first. Brush crumbs and dried liquid out from between the switches with a soft brush. Never pour water on the board and never spray cleaner into the switches. If liquid reached inside the case, contact the maker instead of opening it.

  4. Wash the keycaps

    Fill a bowl with warm water and a small drop of dish soap, then drop the caps in and stir them by hand. Leave them to soak while the board dries, then rub each cap between your fingers to lift the grime from the sides. Rinse them in clean water and spread them on a towel to dry. Wait until the caps feel dry inside and out before you refit them.

  5. Dry the board and check the keys

    Let the board dry fully with the caps off before you plug it back in, and leave it upside down on a towel so any liquid left inside can drain. Press each cap back down until it seats, then plug the keyboard in and press the keys that got wet. If a key still sticks or misses presses, contact the maker or a repair service.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A 96% membrane keyboard with a number pad and RGB backlight, whose switches stay on the board, so a spill means wiping the surface and letting it dry.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A 96% wireless mechanical keyboard with hot-swappable Milk V2 linear switches and double-shot PBT keycaps, so switches lift out for cleaning after a spill.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A 96% wireless mechanical keyboard with hot-swappable LEOBOG star vector switches and a keycap puller in the box, for lifting switches and caps after a spill.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A 96% wireless mechanical keyboard with hot-swappable Mochi switches and VIA support, so switches lift out for cleaning after a spill.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Can I use a keyboard while it dries after a spill?

No. Keep it unplugged and switched off until the board and the caps feel dry inside and out. Plugging a wet board back in can damage the switches.

How do I clean switches on a keyboard that is not hot-swappable?

Leave the switches on the board and wipe them with a damp cloth, since they do not lift out. The AULA S99 is a membrane keyboard that does not support hot-swapping, so its switches stay put.

What if keys still stick after cleaning?

Dry the board again and wipe the sticky switches once more. If a key still sticks or misses presses, contact the maker or a repair service.

Ranked keyboards guides