How to Clean Keyboard Contacts
Keyboard contacts are the small metal parts under each switch that close the circuit when you press a key. Dust, crumbs and sticky residue on those contacts can make keys miss presses or register twice. Unplug the keyboard, lift off the keycaps, and clean the contacts with a dry brush first, then a lightly dampened swab, before you put the keys back.
Unplug the keyboard first
Shut down the computer or unplug the keyboard from it before you touch the contacts. Turn a wireless keyboard off and take out its batteries if it uses them. Working on a keyboard that is still powered can send stray signals to the computer and can short a contact while you clean it. Follow the maker's manual for your model.
Remove the keycaps
Pull the keycaps off with a keycap puller so you can reach the switches below. The SOLAKAKA A99 Pro comes with a keycap puller in the box. Work one row at a time and lay the caps out in order, or take a photo of the layout first, so each cap goes back on the right switch. Keep the caps in a tray while you clean.
Brush away loose dust
Hold the keyboard upside down over a bin and tap its sides gently so loose crumbs fall out. Brush around each switch with a soft brush, working from the top row down so dust falls away from the contacts you already cleaned. Do not blow into the keyboard with your mouth, since moisture from your breath can settle on the contacts. A dry brush keeps the contacts free of liquid at this stage.
Wipe the contacts
Dampen a cotton swab with a small amount of isopropyl alcohol and wipe the metal contact inside each switch housing. Use a fresh swab when one picks up dirt, and do not flood the switch with liquid. Let the alcohol dry fully before you move on, since a wet contact can misfire. Repeat the wipe on any switch that still feels sticky or misses presses.
Reassemble and check each key
Press each keycap back onto its own switch until it sits flat. Plug the keyboard back in or switch the wireless connection on, then open a text editor and press every key in order. A key that still misses or repeats needs another wipe of its contact. If a key stays dead after a second cleaning, contact the maker, since the switch itself may need replacing.
What you need

AULA S99 Gaming Keyboard
A membrane keyboard with a 96% layout and a number pad, so you lift the keycaps to reach the contacts under the membrane layer.
View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue
A hot-swappable mechanical keyboard with Milk V2 linear switches, so you can pull a switch out to reach the contact below it.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A hot-swappable keyboard with LEOBOG star vector switches that comes with a keycap puller for lifting the caps off the switches.
View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard
A hot-swappable mechanical keyboard with Mochi switches and a 96% layout, so the switches lift out for cleaning the contacts beneath.
View on AmazonThese come from our ranked list Best 96 Keyboard, which compares them spec by spec.
FAQ
Can I clean keyboard contacts without removing the keycaps?
You can brush loose dust from the surface, but the contacts sit under the switches, so you need the caps off to wipe them. Pull the caps with a keycap puller and clean one switch at a time.
How often should I clean my keyboard contacts?
Clean them when keys start to miss presses, repeat, or feel sticky, and brush out dust whenever crumbs build up. There is no set schedule; the signs above tell you it is time.
Can water damage keyboard contacts?
Yes. Water can leave residue on the contacts and can short a contact while the keyboard is powered. Use a dry brush first and a swab lightly dampened with isopropyl alcohol, then let the contacts dry fully before you plug the keyboard back in.




