Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean a Keyboard After Removing Keys

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To clean a keyboard after removing the keys, unplug it, take a photo of the layout, pull the keycaps off, clear the debris from the exposed plate, wash the keycaps, let everything dry fully, then put the caps back in place. Cleaning with the caps off reaches the dust and crumbs that sit under the keys, where a cloth cannot reach them.

  1. Unplug the keyboard and photograph the layout

    Shut the computer down and unplug the keyboard, or switch a wireless keyboard off and unplug its cable. Take a clear photo of the full layout from above before you remove anything, so you have a reference for putting the keys back. If your keyboard has a number pad or extra keys, make sure the photo shows those too.

  2. Pull the keycaps off with a keycap puller

    Use a keycap puller if your keyboard came with one, grip one keycap at a time and pull straight up with steady pressure. Work across the keyboard row by row and drop the caps into a bowl or bag to keep them together. Leave the switches and stabilisers in place and do not force a keycap that resists, since forcing it can damage the switch underneath.

  3. Clear dust and crumbs from the exposed plate

    Turn the keyboard upside down over a bin and shake it gently, then tap the back lightly so loose crumbs fall out. Brush the plate and the gaps around the switches with a soft brush, working from one side to the other so dust does not settle back into cleaned areas. Finish by wiping the plate with a cloth that is only slightly damp, and leave the keyboard open to air dry.

  4. Wash the keycaps and let them dry fully

    Soak the keycaps in warm water with a small drop of dish soap and rub each one to remove grime from the sides and the top. Rinse them in clean water and set them out on a towel with the open side down. Wait until every cap is dry inside and out before refitting them, since water left in a cap can drip onto the switch below it.

  5. Refit the keycaps and check every key

    Use your photo to place each keycap over its switch and press it straight down until it seats. Work through the rows in order and check the photo again for any cap that looks out of place, since a cap in the wrong spot is easy to miss. When all the caps are back, plug the keyboard in and press each key to check that it registers and feels right.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A 96% membrane keyboard with a number pad, tri-mode Bluetooth, 2.4GHz and USB-C connections, RGB backlight and full-key macro programming.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A 96% hot-swappable keyboard with Milk V2 linear switches, a number pad, QMK/VIA support and RGB backlight.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A 96% hot-swappable keyboard with an LCD screen, a metal knob, LEOBOG star vector switches and a keycap puller.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A 96% hot-swappable keyboard with Mochi switches, a gasket mount, VIA support, RGB backlight and tri-mode wireless connections.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Can I wash keyboard keycaps in water?

Yes, keycaps can be washed in warm water with a small drop of dish soap. Rinse them, set them open side down on a towel, and wait until they are dry inside and out before putting them back.

Do I need a keycap puller to remove keys?

A keycap puller makes the job easier and pulls caps straight up without bending them. Without one, grip each cap firmly and pull straight up, and stop if a cap resists.

How do I remember where each key goes?

Photograph the full layout from above before removing any keycaps. Use that photo as your guide when refitting them, and check the number pad and function row against it.

Ranked keyboards guides