How to Clean Gunk Off a Keyboard
To clean gunk off a keyboard, unplug it first, then shake out loose crumbs and brush between the keys. Wipe the keycaps and the case with a soft cloth dampened with water, and take the keycaps off only on a keyboard whose manual says they come off. Dry everything before you plug the keyboard back in.
Unplug the keyboard first
Shut the computer down and unplug the keyboard, or switch a wireless keyboard off and unplug its cable. Cleaning a keyboard while it is still connected can press keys and send commands you do not want. Follow the cleaning steps in the maker's manual for your model.
Shake out loose crumbs
Hold the keyboard upside down over a bin and tap it gently so loose crumbs and dust fall out. Do this over a surface you can wipe, since crumbs can scatter. If crumbs stay stuck between the keys, move on to brushing them out rather than forcing them.
Brush between the keys
Use a soft brush to sweep crumbs and dust out from between the keys, working from one side of the keyboard to the other. A small brush reaches into the gaps a cloth cannot. Brush the crumbs onto the desk and wipe them away, then brush again if grit is still caught between the keys.
Remove keycaps only where the manual allows it
On a keyboard that allows it, use a keycap puller to lift the keycaps straight off so you can clean the gunk underneath. The YUNZII B98 PRO and the SOLAKAKA A99 Pro let you swap switches and keycaps, and the SOLAKAKA comes with a keycap puller. The AULA S99 is a membrane keyboard, so check its manual before you pull any keycaps off.
Wipe the keycaps and the case
Wipe each keycap and the keyboard case with a soft cloth dampened with water, then wipe them again with a dry cloth. Keep water out of the switches and away from any charging port. Let the keycaps and the case dry fully before you put the keycaps back on.
Put the keycaps back and check every key
Press each keycap back onto its switch until it sits level with the keys around it. Plug the keyboard back in or switch it on, then press every key and check that each one responds. If a key still sticks, follow the steps in the maker's manual, and contact the maker if the keyboard is under warranty.
What you need

AULA S99 Gaming Keyboard
A 96% membrane keyboard with 99 keys, a number pad, RGB backlight and tri-mode Bluetooth, 2.4GHz and USB-C connection.
View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue
A 96% mechanical keyboard with hot-swappable switches, a gasket mount, RGB backlight and tri-mode Bluetooth, 2.4GHz and USB-C connection.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A 96% hot-swappable keyboard with an LCD screen, a metal knob, RGB backlight and a keycap puller in the box.
View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard
A 96% hot-swappable keyboard with a gasket mount, RGB backlight, VIA support and an 8000mAh battery.
View on AmazonThese come from our ranked list Best 96 Keyboard, which compares them spec by spec.
FAQ
Can I take the keycaps off to clean under them?
Only on a keyboard whose manual says the keycaps come off. The YUNZII B98 PRO and the SOLAKAKA A99 Pro let you swap switches and keycaps, and the SOLAKAKA comes with a keycap puller.
Can I use water to clean my keyboard?
Use a soft cloth dampened with water and wipe the keycaps and case, then dry them with a dry cloth. Keep water out of the switches and the charging port, and follow the cleaning steps in the maker's manual.
What if a key still sticks after cleaning?
Brush between the keys again and check that the keycap sits level. If the key still sticks, follow the maker's manual, and contact the maker rather than opening the keyboard if it is under warranty.




