How to Clean a Sticky Keyboard Key
Unplug the keyboard or switch it off, then clean around the sticky key with a dry cloth and a dry soft brush. If the key still sticks, wipe around it with a cloth lightly dampened with isopropyl alcohol and let it dry. If the key still sticks after that, lift the keycap only if the manual allows it, and contact the maker for a fault inside the board.
Unplug the keyboard first
Unplug a wired keyboard from the computer before you clean it. Switch a wireless keyboard off, and unplug the USB-C cable if one is attached. Cleaning with the keyboard off keeps stray key presses from reaching the computer while you work on the sticky key. The AULA S99 and YUNZII B98 PRO connect over Bluetooth, 2.4GHz and USB-C.
Brush and wipe around the key
Work around the sticky key first, before you lift anything. Blow short bursts of compressed air around the key to move dust out of the gap, then wipe the key and the gaps beside it with a dry lint-free cloth. Turn the board so crumbs fall out of the gaps, and brush the edges of the key with a dry soft brush. If the key still sticks, wipe around it with a cloth lightly dampened with isopropyl alcohol, and let the board dry before you plug it back in.
Lift a keycap only if the manual allows it
If the key still sticks after wiping, check the manual before you lift the keycap. The SOLAKAKA A99 Pro comes with a keycap puller, and the YUNZII B98 PRO, SOLAKAKA A99 Pro and KiiBoom Phantom98 Lite are hot-swappable, so a switch can be lifted out and put back without soldering. The AULA S99 is a membrane keyboard and does not support hot-swapping, so do not pull its switches. If you lift a keycap, wipe the switch or membrane underneath with a dry cloth and put the cap back on straight.
When the key still sticks
If the key still sticks after cleaning around it and under the cap, the fault sits inside the board. Do not open the keyboard to reach it, and do not pull switches from a board that does not support hot-swapping. Contact the maker for help, and follow the manual that came with the keyboard. Cleaning the outside again will not fix a fault inside.
What you need

AULA S99 Gaming Keyboard
A 96% membrane keyboard with tri-mode Bluetooth, 2.4GHz and USB-C, a number pad and RGB backlight, in a 99-key layout.
View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue
A 96% hot-swappable mechanical keyboard with Milk V2 Linear switches, QMK/VIA, a number pad and an 8000mAh battery.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A 96% hot-swappable mechanical keyboard with an LCD screen, a metal knob, a keycap puller and an 8000mAh battery.
View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard
A 96% hot-swappable mechanical keyboard with Mochi switches, VIA, a 97-key layout and an 8000mAh battery.
View on AmazonThese come from our ranked list Best 96 Keyboard, which compares them spec by spec.
FAQ
Can I use water to clean a sticky key?
Use a dry cloth first. If you dampen the cloth, use a little isopropyl alcohol or water, wring it out well, and keep liquid out of the gaps so it does not reach the parts inside. Let the board dry before you plug it back in.
Why does a keyboard key stick?
Dust and crumbs collect under the key, and dried spills leave a film on the switch or membrane. Cleaning around the key and under the cap takes the buildup off so the key moves freely again.
Can I pull a keycap off to clean under it?
Check the manual first. The SOLAKAKA A99 Pro comes with a keycap puller, and the YUNZII B98 PRO, SOLAKAKA A99 Pro and KiiBoom Phantom98 Lite are hot-swappable. The AULA S99 is a membrane keyboard and does not support hot-swapping, so do not pull its switches.
How often should I clean my keyboard?
Clean it when a key sticks, skips, or feels rough under your finger. A board that types smoothly does not need cleaning.




