Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Change Keyboard Stabilizers

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To change keyboard stabilizers, remove the keycap from the long key, lift the old stabilizer out of the plate, and press the new stabilizer into place before refitting the keycap. Unplug the keyboard or switch it off first, and work on a clear desk so small parts stay in view. The steps below cover removal, fitting and checking the key.

  1. Unplug the keyboard and clear the desk

    Unplug the keyboard from the computer or switch off wireless mode before you touch any key. Follow the manual that came with the keyboard for key removal and for any step that opens the case. Set the keyboard on a clear desk with the keycap puller, the new stabilizers and a small tray for parts. Keep the removed keycaps in order so each one goes back to the same key.

  2. Remove the keycap from the long key

    Slide the keycap puller under the keycap of the long key and pull straight up with steady pressure. Stabilizers sit under long keys such as the spacebar, Enter and Shift, so pull the cap off evenly to avoid bending the wire. If the keycap resists, stop and check the manual rather than forcing it. Set the keycap aside with the other parts.

  3. Lift out the old stabilizer

    With the keycap off, unhook the stabilizer wire from the key and lift the stabilizer housings out of the plate. Note how the wire sits before you move it, since the new stabilizer goes back the same way. Wipe the area clean of dust with a dry cloth. If a housing is cracked or the wire is bent, replace the full stabilizer set rather than reusing the damaged part.

  4. Fit the new stabilizer and check the key

    Press the new stabilizer housings into the plate and hook the wire into place, matching the layout you noted. Press the keycap back on and tap the key a few times to check that it moves down evenly and returns to the top. If the key sticks or rattles, lift the cap and seat the wire again. Repeat the same steps for each long key that needs a new stabilizer.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A membrane keyboard with a 96% layout and number pad; the maker states it does not support hot-swapping, so follow the manual for key removal.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A hot-swappable mechanical keyboard with pre-lubed switches and stabilizers, a gasket mount and a 96% layout with a number pad.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A hot-swappable keyboard with pre-lubricated stabilizers and a keycap puller in the box, plus a 96% layout with 97 keys.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A hot-swappable keyboard with pre-lubricated stabilizers, a gasket mount and VIA support in a 96% layout with 97 keys.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Can I change stabilizers on any keyboard?

No. Mechanical keyboards with removable switches and stabilizers suit a swap, while membrane keyboards hold their parts in place. Check the manual for the keyboard you own before ordering parts.

Do new stabilizers need lubricant?

A small amount of lubricant on the stabilizer housings and wire ends quiets the rattle. Use only lubricant made for keyboard stabilizers, and follow the instructions on the pack.

What if a key still rattles after the swap?

Lift the keycap and check that the wire sits fully in both housings and that the housings sit flat in the plate. Reseat the wire and press the keycap back on, then press the key a few times to check the sound. If the rattle stays, the wire or a housing may be bent and need a fresh set.

Ranked keyboards guides