Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Build a Mechanical Keyboard

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To build a mechanical keyboard, start with a hot-swappable base, add switches and keycaps that fit it, then connect it and set up the keys. A hot-swappable board lets you press switches in without soldering, so you can change switches and keycaps later. Choose the layout, connection and switches first, then fit the parts in order.

  1. Pick a hot-swappable base and layout

    Start with a hot-swappable base, so switches press into the sockets without soldering. A 75% layout keeps the arrow keys in a compact board: the AULA F75 Pro is an 81-key 75% keyboard. A 60% layout is smaller still, and the Aula WIN60 HE is a compact 60% keyboard that saves desk space. Decide how the board connects. The AULA F75 Pro works with Bluetooth 5.0, 2.4 GHz wireless and a USB wired connection.

  2. Choose switches that fit the base

    Check whether the base takes 3-pin or 5-pin switches, since the AULA F75 Pro supports both. The AULA F75 Pro in black uses pre-lubed LEOBOG reaper switches, and the gradient blue version uses LEOBOG star vector switches. The Redragon K671 uses a linear red switch, and the Aula WIN60 HE uses Hall Effect magnetic switches with adjustable actuation and rapid trigger mode. Pick the switch type named for the board you own.

  3. Fit the switches into the board

    Line up the pins of each switch with the sockets on the board, then press each switch straight in until it sits flat. Work across the board one row at a time, and check that no switch sits tilted or loose. The AULA F75 Pro has pre-lubricated stabilizers fitted to the board. If a switch does not sit flat, lift it out, check that the pins are straight, and fit it again.

  4. Add the keycaps and check the layout

    Press the keycaps onto the switches, starting with the bottom row and working upward, so each keycap sits on the right switch. The AULA F75 Pro models have side-printed PBT keycaps. Check the arrow keys, the space bar and any knob on the board, and move any keycap that sits on the wrong switch. Look over the whole board before you connect it, so the layout matches the keys you plan to press.

  5. Connect the keyboard and set it up

    Connect the board by USB cable, or by Bluetooth 5.0 or 2.4 GHz wireless on the AULA F75 Pro, then press each key and check that it registers. Use the driver for the board to remap keys, set macros and adjust the RGB backlighting: the Redragon K671 supports macro editing, and the Aula WIN60 HE uses a web-based driver for remapping, macros and RGB lighting. Adjust the backlight and the knob controls to suit your desk.

What you need

AULA F75 Pro Wireless Mechanical Keyboard

AULA F75 Pro Wireless Mechanical Keyboard

A 75% hot-swappable keyboard with pre-lubed LEOBOG reaper switches, a control knob, RGB backlighting and side-printed PBT keycaps.

View on Amazon
AULA F75 Pro Wireless Mechanical Keyboard

AULA F75 Pro Wireless Mechanical Keyboard

A 75% hot-swappable keyboard with pre-lubed LEOBOG star vector switches, RGB backlighting and side-printed PBT keycaps.

View on Amazon
Redragon Mechanical Gaming Keyboard Wired

Redragon Mechanical Gaming Keyboard Wired

A wired keyboard with hot-swappable linear red switches, 11 backlit modes, macro editing and four spare switches.

View on Amazon
Aula WIN60 HE

Aula WIN60 HE

A 60% wired keyboard with hot-swappable Hall Effect magnetic switches, adjustable actuation, rapid trigger mode and RGB lighting.

View on Amazon

These come from our ranked list Best Mechanical Keyboard, which compares them spec by spec.

FAQ

Do I need to solder switches to build a keyboard?

No. A hot-swappable base lets switches press in without soldering. The AULA F75 Pro models, the Redragon K671 and the Aula WIN60 HE are all hot-swappable, so you can fit and replace switches by hand.

What layout should I choose for a first build?

A 75% layout keeps the arrow keys in a compact board, and the AULA F75 Pro is an 81-key 75% keyboard. A 60% layout is smaller and saves desk space. Choose the layout that fits your desk and the keys you use.

Can I change switches and keycaps later?

Yes, on a hot-swappable board you can lift switches out and fit different ones, and you can swap the keycaps. Check that new switches match the 3-pin or 5-pin sockets on your board, and that the keycaps match its layout.

Ranked keyboards guides