How to Build a Small PC
To build a small PC, pick the case size first, then choose parts that fit it, check that they work together, and put them together in order. A small case takes a small board, a low-profile cooler and a short power supply and graphics card, so size decides every other choice. A ready-made mini PC is the other path when you want a small computer without building one.
Pick the size first
The case size decides every other choice, so settle it before you buy parts. A small case takes a small board, a low-profile cooler and a short power supply, and it leaves less room for cables and airflow. Measure the space where the computer will sit, then pick a case that fits that space with room to reach the ports. A ready-made mini PC skips this step, since its case and parts already match.
Choose parts that fit the case
Match each part to the case before you buy it. The board, the cooler, the power supply and the graphics card each take space, and a part that is too tall or too long will not fit. Check the size each part lists in its manual or spec sheet, and compare it with the space the case gives. A part that fits on paper still needs room for cables and air to move around it.
Check compatibility before you buy
Parts must share the same standards to work together. The processor must match the board socket, the memory must match the board memory type, such as DDR4 or DDR5, and the storage must match the slot on the board. Check the video outputs on the board or card against the inputs on your monitor, and check that your USB-C port supports video output if you plan to run a display from it. The maker's manual lists what each part supports.
Build in order and manage cables
Work with the power off and follow the maker's manual for each part. Fit the board, the cooler, the memory and the storage first, then the power supply and the graphics card, and plug in each cable as you go. Route cables along the edges of the case so air can move past the parts. Leave the side panel off until the first boot, so you can see that every fan turns and every cable sits firm.
First boot and setup
Connect the monitor, keyboard and mouse, then switch the power on and watch for the setup screen. If nothing shows, switch it off, unplug it and check that every cable and part sits firm, then try again. Install the operating system and the drivers the maker lists, and follow the maker's manual for the settings. Check the requirements published for your software before you add more parts.
What you need

Apple Mac mini PC M6 chip
A five-by-five-inch desktop with an M6 chip, 16GB unified memory, 256GB SSD, three Thunderbolt 4 ports and 2.5Gb Ethernet.
View on Amazon
KAMRUI AK1PLUS Mini PC Computer
A mini PC with an Intel Celeron N5095, 16GB RAM, 256GB SSD, dual HDMI 2.0 and 4 USB 3.2 ports for two 4K displays.
View on Amazon
BOSGAME E5 11 Pro Mini PC
A mini PC with an AMD Ryzen 3 5300U, 8GB DDR4, 256GB SSD, dual 2.5GbE LAN and triple 4K displays over HDMI, DisplayPort and Type-C.
View on Amazon
BOSGAME E5 Plus Mini PC
A mini PC with an AMD Ryzen 3 5400U, 8GB RAM upgradable to 64GB, 256GB SSD and dual 2.5G LAN with triple 4K display outputs.
View on AmazonThese come from our ranked list Best Mini PC, which compares them spec by spec.
FAQ
Is a mini PC the same as a small PC?
A mini PC is one kind of small PC: a complete computer in a small case, ready to use. A small PC you build yourself uses the same idea, with small parts in a small case.
Can I upgrade a mini PC later?
Some mini PCs let you add memory or storage, and some do not. The BOSGAME E5 Plus expands to 64GB through two SODIMM slots with an extra M.2 slot, so check the maker's manual for your model before you open it.
Do I need a graphics card in a small PC?
Not always. Many small PCs use graphics built into the processor. Check the requirements published for your software or game before you choose a separate graphics card.




