Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Apply O-Rings to a Keyboard

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To apply O-rings, pull each keycap off with a keycap puller, slide an O-ring onto the stem under the keycap, and press the keycap back onto its switch. The ring cushions the keycap when it bottoms out, which softens the sound and the feel. This works on mechanical keyboards with removable keycaps; the membrane keyboard in this guide does not take O-rings.

  1. Check that your keyboard is mechanical

    O-rings slide onto the stem under a keycap and cushion it against the switch housing when the key bottoms out. They are made for mechanical keyboards with keycaps that pull off. A membrane keyboard, such as the AULA S99 in this guide, uses a membrane switch type, and O-rings are made for mechanical keycap stems. The other keyboards in this guide are mechanical, hot-swappable boards.

  2. Pull the keycaps off

    Work through the keys in order so each keycap goes back in the right place. Grip a keycap with a keycap puller, pull straight up, and set the keycap aside, keeping the order. If a keycap resists, wiggle the puller gently instead of forcing it. Keep the pulled keycaps together in order before the rings go on.

  3. Slide an O-ring onto each stem

    Turn a pulled keycap over so the stem underneath faces up. Slide an O-ring over the stem and push it up until it sits against the underside of the keycap. The ring should sit flat and snug on the stem, not tilted or stretched out of shape. Repeat for each keycap on a mechanical keyboard with removable keycaps.

  4. Press the keycaps back on

    Line up the stem of a keycap over its switch and press down firmly until the keycap seats. Work through the pulled keycaps in order, seating each keycap before moving to the next. Once all the rings are on and the keycaps are back, press each key a few times to check that it moves freely and registers.

  5. Check the feel and sound

    Type a few lines and listen. Each key should bottom out with a softer tap than before, and the travel should feel slightly shorter. If a key feels mushy or fails to register, pull its keycap off and check that the ring sits flat on the stem. If the feel is not to your taste, pull the rings off and the keyboard returns to normal.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A 96% membrane keyboard with a number pad; O-rings fit mechanical keycap stems, so they do not fit this board.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A 96% hot-swappable mechanical keyboard with Milk V2 linear switches and a number pad, with keycaps that swap off for O-rings.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A 96% hot-swappable mechanical keyboard with LEOBOG star vector switches, an LCD screen and a keycap puller in the box.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A 96% hot-swappable mechanical keyboard with Mochi switches, a gasket mount and RGB backlight, with keycaps that pull off for O-rings.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Do O-rings work on a membrane keyboard?

No. O-rings are made for the stems under mechanical keycaps. The membrane keyboard in this guide uses a membrane switch type, and O-rings are made for mechanical keycap stems.

Do I need to remove the switches to fit O-rings?

No. O-rings go on the keycaps, not the switches. Pull each keycap off, slide a ring onto its stem, and press the keycap back on. The switches stay in the board.

Will O-rings change how my keyboard sounds?

Yes. They soften the sound when a key bottoms out, because the ring cushions the keycap against the switch. The keys also travel a shorter distance before they stop.

Can I remove O-rings if I do not like them?

Yes. Pull the keycaps off again, slide the rings off the stems, and press the keycaps back on. The keyboard goes back to how it felt before.

Ranked keyboards guides