Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Apply a Keyboard Cover

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To apply a keyboard cover, clean the keyboard, line up the cover with the key layout, and press it down over the keys. Start at one corner and work across the board so the molded key shapes sit in place. Press a few keys to check the cover stays put while you type.

  1. Check the cover matches your layout

    Look at the key layout on your keyboard and compare it with the shapes molded into the cover. Check the number pad, the arrow keys, and the top row, since covers are cut for a set layout. Hold the cover above the keyboard and line up the corners before you press it down. If the shapes sit over the wrong keys, lift the cover off and check the size and layout notes from the maker.

  2. Clean the keyboard

    Turn the keyboard off or unplug it, then turn it over and tap the back to shake out crumbs. Wipe the keys and the frame with a dry cloth, then use a cloth with a small amount of water for sticky spots. Let the keys dry in full before you put the cover on. A clean, dry surface helps the cover sit flat and keeps grit from sitting under the cover.

  3. Line up the cover

    Hold the cover by the edges and set it over the keyboard with the key shapes facing down. Line up the space bar and the number pad first, since those areas show a poor fit right away. Lower the cover slowly and keep the edges even with the frame on the left and right sides. If one side hangs over the edge, lift the cover and shift it until the rows line up.

  4. Press the cover into place

    Press down with flat fingers, starting in the middle and working toward the corners. Press around the space bar, the number pad, and the top row so the molded shapes drop over the keys. Run your fingers along the edges to seat the rim around the frame. The cover should lie flat with the key shapes centered on the keys and the edges even on the sides.

  5. Check the keys and edges

    Press keys in the middle, in the corners, and on the number pad to check the feel through the cover. Type a short line and watch for keys that stick or a cover that lifts at the edge. Lift and reseat a corner if the cover bunches up or shifts while you type. Keep the cover flat during use and lift it off by the edge when you need to clean under it.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A 96% membrane keyboard with 99 keys, a number pad, RGB backlight, and Bluetooth, 2.4GHz, and USB-C connection modes.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A 96% wireless mechanical keyboard with 100 keys, a number pad, Milk V2 linear switches, RGB backlight, and QMK/VIA support.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A 96% wireless mechanical keyboard with 97 keys, a number pad, an LCD screen, a metal knob, and RGB backlight.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A 96% wireless mechanical keyboard with 97 keys, Mochi switches, RGB backlight, hot swap support, and VIA customization.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Can I type with the cover on?

Yes. The cover stays on the keyboard while you type, and you press the keys through the cover. If a key sticks or the cover shifts, lift the edge, reseat the cover, and press the keys again to check the fit.

How do I clean a keyboard cover?

Lift the cover off by the edge and shake out crumbs over a bin. Wipe the cover with a cloth and a small amount of water, then let it dry in full. Put the cover back on only when the cover and the keys feel dry to the touch.

Will one cover fit a different keyboard?

Check the layout, key shapes, and size before you buy or use a cover on a different keyboard. Covers are molded for a set layout, so a cover made for one board can sit loose or bunch up on a board with a different layout.

Ranked keyboards guides