How Do Mechanical Keyboards Work?
A mechanical keyboard registers each key press with its own switch under the keycap. Pressing a key pushes the switch stem down until metal contacts meet, and the keyboard circuit board sends that key signal to your computer by cable or wireless connection. Releasing the key lets a spring push the stem back up.
What happens inside one key
Each keycap sits on a switch with a moving stem, a spring and a housing. When you press the keycap, the stem travels down and the spring compresses. Near the bottom of that travel, two metal contacts inside the switch meet and complete a circuit. When you release the key, the spring pushes the stem and keycap back to their starting position, and the contacts separate again.
How the signal reaches your computer
The switches connect to a circuit board under the keys. A controller on that board watches which circuits are closed and turns each closed switch into a key signal. The keyboard then sends the signal to your computer through a USB-C cable, Bluetooth or a 2.4 GHz wireless receiver, depending on the connection mode you select. Anti-ghosting and N-key rollover designs let the controller report several keys pressed at the same time.
Why switches feel and sound different
Switch designs change the feel of a press. The stem shape, spring and contact parts decide whether a press feels smooth, has a bump you can feel, or makes a click. Extra parts around the switches also change the sound. Foam dampening layers and gasket mounts cushion the parts inside the case, which softens the noise when a key reaches the bottom of its travel.
Hot-swappable switches and keycaps
On a hot-swappable keyboard, each switch plugs into a socket on the circuit board instead of being soldered in place. You can pull a keycap off, pull the switch out and push in a replacement that matches the socket, such as a 3-pin or 5-pin switch. Keycaps can also be replaced. PBT keycaps resist wear and fading and keep their surface texture during use.
What to check before swapping parts
Before you change a switch or keycap, turn the keyboard off or unplug its cable. Check that the replacement switch matches the pin count and socket type of your keyboard, and that the keycap fits the stem shape and the row height of the key you are replacing. Press the new switch straight down until it seats fully, then replace the keycap and check that the key registers.
What you need

Redragon K689 PRO Wireless 108-Key Gasket RGB Gaming Keyboard
A full-size 108-key keyboard with four extra hotkeys, gasket-mounted construction with noise dampening, PBT keycaps and USB-C, Bluetooth and 2.4 GHz connections.
View on Amazon
RK ROYAL KLUDGE S98 Wireless Mechanical Keyboard w/Smart Display & Knob
A 96% keyboard with 98 keys, linear cream switches, a smart display and control knob, hot-swappable switches and double-shot PBT keycaps.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A 96% keyboard with 97 keys, an LCD screen and metal knob, gasket structure, hot-swappable switches and double-shot PBT keycaps.
View on Amazon
SOLAKAKA KI99 Pro Wireless Mechanical Keyboard
A 96% keyboard with quiet silent switches, a control knob, gasket structure with noise-reducing layers, hot-swappable switches and PBT keycaps.
View on AmazonThese come from our ranked list Best Mechanical Keyboard for Work, which compares them spec by spec.
FAQ
Do mechanical keyboards need batteries?
Keyboards that connect by Bluetooth or a 2.4 GHz receiver run on battery power, while a USB-C cable connection carries the signal from the keyboard. Check the connection modes listed for the keyboard you are considering, and charge it with the cable it came with.
Can you replace a single broken switch?
On a hot-swappable keyboard, yes. Turn the keyboard off or unplug it, pull the keycap, pull the switch from its socket and push in a replacement with the same pin count. If the switch is soldered to the circuit board, contact the maker instead.
Why do mechanical keyboards sound different?
The switch design, keycap material, case construction and dampening layers all change the sound of a press. Silent switches and foam dampening reduce typing noise, while gasket mounts cushion the parts inside the case and soften the sound when keys bottom out.




