Should You Re-Lubricate Keyboard Switches?
No. Keyboard switches do not need re-lubing as routine maintenance. The YUNZII B98 PRO, SOLAKAKA A99 Pro and KiiBoom Phantom98 Lite in the list below ship with pre-lubed switches or stabilizers. Re-lube only when a switch feels scratchy, sounds rattly or moves unevenly, and only on a hot-swappable mechanical keyboard where the switches pull out without soldering.
What re-lubing does
Lube is a thin grease applied inside a mechanical switch, between the stem and the housing and around the spring. It lowers friction as the stem travels, so the press feels smoother and the switch sounds quieter. Factory lube wears down with use, and a dry switch can feel scratchy or sound harsh. Re-lubing puts a fresh coat back on those contact points. It changes feel and sound, not what the switch does: the key still sends the same signal when it bottoms out.
Signs a switch needs fresh lube
Listen and feel for change rather than watching the calendar. A switch that drags or grates on the way down, a key that returns slowly or sticks, and a stabilizer that rattles on the space bar or the larger keys all point to dry contact points. If one key feels different from its neighbors, pull that switch and check it before you lube the whole board. A switch that already feels smooth and sounds even needs nothing done to it.
Check that your keyboard is hot-swappable
Only pull switches from a board that supports hot-swapping, so the switch lifts out without soldering. The YUNZII B98 PRO, SOLAKAKA A99 Pro and KiiBoom Phantom98 Lite in the list below are hot-swappable, and their switches pull out with a switch puller. Soldered switches need a soldering iron and desoldering tools to remove, and that work risks the board. If your keyboard is soldered, leave the switches in place or ask the maker about service options.
Membrane keyboards cannot be re-lubed
A membrane keyboard is built around rubber domes and a membrane sheet under the keys. Under a key sits a rubber dome over a membrane sheet, and pressing the key pushes the dome down to make contact. There is no stem, housing or spring to lube, and opening the board will not give you a switch to work on. The AULA S99 in the list below is a membrane keyboard and does not support hot-swapping, so re-lubing does not apply to it. If its keys feel wrong, check the maker's warranty or support pages.
How to re-lube a switch
Unplug the keyboard first. Pull the keycap with a keycap puller, then lift the switch out with a switch puller. Open the switch housing with a switch opener, keeping the stem, spring and housing together. Brush a thin coat of lube on the stem rails, the inside of the housing and the ends of the spring, then put the switch back together and press it back into the board. Work through one switch at a time, and check the feel of the keys as you go.
What you need

AULA S99 Gaming Keyboard
A 96% membrane keyboard with Bluetooth 5.0, 2.4GHz and USB-C, RGB backlight and full-key macro programming, and it does not support hot-swapping, so it cannot be re-lubed.
View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue
A 96% wireless mechanical keyboard with pre-lubed Milk V2 linear switches, hot-swappable 3-pin and 5-pin sockets, a gasket mount and an 8000mAh battery.
View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard
A 96% wireless mechanical keyboard with LEOBOG star vector switches, pre-lubricated stabilizers, hot-swappable 3/5-pin sockets, an LCD screen and an 8000mAh battery.
View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard
A 96% wireless mechanical keyboard with pre-lubed Mochi switches, hot-swappable sockets, pre-lubricated stabilizers, VIA support and an 8000mAh battery.
View on AmazonThese come from our ranked list Best 96 Keyboard, which compares them spec by spec.
FAQ
Do new mechanical keyboards need re-lubing?
No. The YUNZII B98 PRO and KiiBoom Phantom98 Lite in the list below ship with pre-lubed switches, and the SOLAKAKA A99 Pro ships with pre-lubricated stabilizers. Re-lube only when a switch starts to feel scratchy or sound uneven.
How often should I re-lube my switches?
There is no set interval. Re-lube when you notice the signs: a scratchy press, a slow return, a key that sticks, or a stabilizer that rattles. A switch that still feels smooth and sounds even needs nothing done to it.
Can I re-lube switches without desoldering them?
Yes, if your keyboard is hot-swappable. The YUNZII B98 PRO, SOLAKAKA A99 Pro and KiiBoom Phantom98 Lite in the list below let you pull switches out with a switch puller and press them back in. Soldered switches need a soldering iron and desoldering tools to remove.




